Hi,
I have a P3 Dell laptop without a hard disk (malfuction of controller?) which manages to run Knoppix 7.0.4 with only 128mb of ram. I thought it is because it recognised my PCMCIA slot 5gb hard disk and used it for a swap file, but it is not being shown as a drive, and I seem to remember drives should be recognised automatically? The drive is working, it is recognised by the winxp install disk, and from win on another laptop, but the machine won't boot from it.
Is there a way to use a PCMCIA hdd from Knoppix? Is it a driver issue, or a mounting issue?
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
Dell PowerEdge R620 Server 2x E5-2650 V2 = 16 Cores H710P 128GB RAM 2x 600GB SAS
$274.99