-
Senior Member
registered user
Boot from Knoppix ISO in HDD using grub
I used the following code:
Code:
menuentry "Knoppix ISO" {
insmod part_msdos
insmod ext3
set root=(hd0,msdos2) #the partition where you've stored knoppix iso
loopback loop /KNOPPIX_V7.0.4DVD-2012-08-20-EN/KNOPPIX_V7.0.4DVD-2012-08-20-EN.iso
linux (loop)/boot/isolinux/linux boot=isolinux iso-scan/filename=/KNOPPIX noeject noprompt --
initrd (loop)/boot/isolinux/minirt.gz
}
everything works, then knoppix iteratively searchs KNOPPIX in /dev/sdax for a few times and lets go.
Where I am going wrong?
--------------------
formatted by mod
Last edited by Werner P. Schulz; 12-08-2012 at 05:05 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco Catalyst 48-Port Manage Gigabit Switch w/ 2x 10G SFP+ WS-C2960S-48FPD-L
$59.99
NEW Cisco C9300-48P-A 48 Port Gigabit POE+ Switch with module C9300-NM-8X
$2999.00
Cisco QSFP-100G-LR4-S 100GBASE-LR4 QSFP28, 1310nm, 10km, LC, SMF
$335.99
Cisco Catalyst 3650 48-Port Managed PoE+ Gigabit Switch WS-C3650-48FS-E
$55.99
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco QSFP-40G-SR-BD BiDi Short-reach Transceiver, 1 Year Warranty
$17.25
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
Cisco C9300-48 48 Port Switch Dual PSU W/C9300-NM-8X P/N: C9300-48U-A Tested
$799.99
Cisco Catalyst 3850 WS-C3850-48U-S 48-Port UPOE Gb Switch w/ NM-2-10G (BH)
$134.96