-
Senior Member
registered user
Boot from Knoppix ISO in HDD using grub
I used the following code:
Code:
menuentry "Knoppix ISO" {
insmod part_msdos
insmod ext3
set root=(hd0,msdos2) #the partition where you've stored knoppix iso
loopback loop /KNOPPIX_V7.0.4DVD-2012-08-20-EN/KNOPPIX_V7.0.4DVD-2012-08-20-EN.iso
linux (loop)/boot/isolinux/linux boot=isolinux iso-scan/filename=/KNOPPIX noeject noprompt --
initrd (loop)/boot/isolinux/minirt.gz
}
everything works, then knoppix iteratively searchs KNOPPIX in /dev/sdax for a few times and lets go.
Where I am going wrong?
--------------------
formatted by mod
Last edited by Werner P. Schulz; 12-08-2012 at 05:05 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
IBM QRadar xx29 Server 4412Q2A
$170.00
IBM 7944AC1 System x3550 M3 Server 1*Intel Xeon X5650 2.67GHz 4GB SEE NOTES
$27.25
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
IBM Power 720 POWER7 00E6516 3.6GHz CPU 64GB RAM Server
$209.98
IBM SYSTEM x3200 M2 Server - HDD wiped, No OS
$75.00
ibm server z series
$16000.00
IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W
$199.00
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server
$319.99
IBM System X3500 M4 7383AC1 (E5-2650 v2 2.60GHz - 192GB RAM - M2000 - NO OS/HDD)
$294.92
IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED
$99.99