Results 1 to 8 of 8

Thread: Boot from Knoppix ISO in HDD using grub

  1. #1
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    271

    Boot from Knoppix ISO in HDD using grub

    I used the following code:
    Code:
    menuentry "Knoppix ISO" {
    insmod part_msdos
    insmod ext3
    set root=(hd0,msdos2) #the partition where you've stored knoppix iso
    loopback loop /KNOPPIX_V7.0.4DVD-2012-08-20-EN/KNOPPIX_V7.0.4DVD-2012-08-20-EN.iso
    linux (loop)/boot/isolinux/linux boot=isolinux iso-scan/filename=/KNOPPIX noeject noprompt --
    initrd (loop)/boot/isolinux/minirt.gz
    }
    everything works, then knoppix iteratively searchs KNOPPIX in /dev/sdax for a few times and lets go.
    Where I am going wrong?

    --------------------
    formatted by mod
    Last edited by Werner P. Schulz; 12-08-2012 at 05:05 PM.

  2. #2
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    271
    I have uploaded the relavant files in my google drive. You could click the file and peruse them. Any doubt that remain will, I hope, be cleared by the pics.
    The logical drives that I have are given, also the drive in which the knoppix iso resides is apparent from the codes in the main post. The files could be accessed at:
    https://docs.google.com/folder/d/0B0...JUbzVyUDA/edit
    Regards
    Last edited by rajibando; 12-08-2012 at 04:33 PM. Reason: adding detail

  3. #3
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    Code:
    loopback loop /KNOPPIX_V7.0.4DVD-2012-08-20-EN/KNOPPIX_V7.0.4DVD-2012-08-20-EN.iso
    This isn't a sufficient path-declaration.

    Have a look at:
    https://help.ubuntu.com/community/Gr...OBoot/Examples

  4. #4
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    271
    Thank you, Prof. Schulz.
    I studied and experimented with the information retrieved from the link you'd provided, & I solved the problem.
    The relevant code contained in the link, even when customised to suit a particular system such as mine, is not correct. I found that the following code works beautifully, and the checkpoints confirm it:
    }
    echo 1
    menuentry "Knoppix ISO" {
    echo 2
    set root=(hd0,msdos2) #the partition where I've stored knoppix iso
    echo 3
    loopback loop /KNOPPIX/KNOPPIX.iso
    echo 4
    linux (loop)/boot/isolinux/linux64 bootfrom=/dev/sdb2/KNOPPIX/KNOPPIX.iso boot=isolinux keyboard=us
    initrd (loop)/boot/isolinux/minirt.gz
    }
    I hope this helps others. I write in the Debian forum as bkpsusmitaa

  5. #5
    Moderator Moderator
    Join Date
    Nov 2010
    Location
    Germany/ Dietzenbach
    Posts
    1,124
    I'm not a "Prof.". In Germany it is a title only for teachers at university.

  6. #6
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    271
    You aren't a Professor!? Not only in Germany, I think the world over "Prof." is a title for tenured teachers in Universities. I thought that your knowledge-base as a moderator of the forum should ensure your being a Professor of a Univ.
    I am sorry for my assumption. But my respect and awe remain, nonetheless!

  7. #7
    Senior Member registered user
    Join Date
    Dec 2008
    Location
    Mysore, India
    Posts
    271
    The above menu entry was for my desktop, which had an AMD processor. Otherwise, the menu entry could be: ############################################## menuentry "Knoppix_8.2 ISO" { echo 1 set root=(hd0,msdosx) # x=partition number where the iso resides echo 2 loopback loop /KNOPPIX/KNOPPIX_V8.2-2018-05-10-EN.iso echo 3 linux (loop)/boot/isolinux/linux bootfrom=/dev/sdax/KNOPPIX/KNOPPIX_V8.2-2018-05-10-EN.iso keyboard=us root=/dev/ram rw ramdisk_size=100000 lang=us apm=power-off echo 4 initrd (loop)/boot/isolinux/minirt.gz } ############################################## Hope this helps ...
    Last edited by rajibando; 03-23-2019 at 01:04 PM. Reason: paragraphs entered

  8. #8
    Member registered user
    Join Date
    Mar 2010
    Location
    USA
    Posts
    50

    8.1 or 8.2 boot from loopback and 8.2 boot from ISO on HD with persistence

    Just in case this will help anyone else, as I always forget how to do this, even though its been explained to me more that once (thanks to those patient enough). I am putting it in my own words from my own system to try to hammer it into my thick skull. Too bad we don't have 8.3 or 8.5 assuming they are better. I looked at the site selling the magazine and it says its a PDF which makes no sense, and after all the effort I don't want to pay $15 for a DVD. I wish Mr Knopper would offer a $5 download of current code. That would be sensible. I like his choices of games a lot.

    Anyway, This is my /etc/grub.d/40_custom file stored on my main OS which is antiX on /dev/sda1. After editing the file sudo update-grub needs to be run to generate the new grub.cfg. Then when you reboot it gets used.

    On my system:
    /dev/sda3 has directories where ISO files are stored to boot from loopback. It runs exactly as it would have from flashdrive or DVD, and no changes are saved.

    /dev/sda7 was formatted to Ext4, then Knoppix 8.2 was loaded by booting Knoppix 8.2 from flashdrive with tohd=/dev/sda7. I then renamed the file /KNOPPIX/knoppix-data.inf to was-knoppix-data.inf so that the mkimage boot parameter would ask how big of a persistence file to build and then build it the next time I booted into it. Note the nocompiz does the same thing as no3d (which now crashes the machine) used to do for older versions.

    Code:
    menuentry "Knoppix 8.2 DVD ISO Loopback" {
        set isofile="/knoppix-8.2/KNOPPIX_V8.2-2018-05-10-EN.iso"
        loopback loop (hd0,3)$isofile
        echo "Loading Knoppix 8.2 linux"
        linux (loop)/boot/isolinux/linux bootfrom=/dev/sda3$isofile keyboard=us lang=en tz=America/Chicago nocompiz
        echo "Loading minirt"
        initrd (loop)/boot/isolinux/minirt.gz
    }
    menuentry "Knoppix 8.1 DVD ISO Loopback" {
        set isofile="/knoppix-8.1/KNOPPIX_V8.1-2017-09-05-EN.iso"
        loopback loop (hd0,3)$isofile
        echo "Loading Knoppix 8.1 linux"
        linux (loop)/boot/isolinux/linux bootfrom=/dev/sda3$isofile keyboard=us lang=en tz=America/Chicago no3d nomce hpsa.hpsa_allow_any=1 loglevel=1
        echo "Loading minirt"
        initrd (loop)/boot/isolinux/minirt.gz
    }
    menuentry "Knoppix 8.2 from /dev/sda7" {
        insmod part_msdos
        insmod ext2
        set root='hd0,msdos7'
        linux /KNOPPIX/linux64 knoppix_dir=/KNOPPIX mkimage keyboard=us lang=us tz=America/Chicago nocompiz
        initrd /KNOPPIX/minirt.gz
    }

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


IBM SYSTEM x3200 M2 - HDD Removed picture

IBM SYSTEM x3200 M2 - HDD Removed

$80.00



3TB 3.5 seagate ST3000nm0043 SAS 7200RPM 128MB 6GB/s HDD hard drive for servers  picture

3TB 3.5 seagate ST3000nm0043 SAS 7200RPM 128MB 6GB/s HDD hard drive for servers

$23.99



IBM X3650 M4 4-Bay 2.5

IBM X3650 M4 4-Bay 2.5" 2x E5-4640 2.4GHz 8GB M5110e IMM Server 2x PSU

$185.00



IBM X3200M3 Desktop Single Xeon X3450 @2.67GHz, 10GB RAM, NO HDD picture

IBM X3200M3 Desktop Single Xeon X3450 @2.67GHz, 10GB RAM, NO HDD

$115.00



IBM System x3650 Server Dual Xeon E5160, 3GB Ram picture

IBM System x3650 Server Dual Xeon E5160, 3GB Ram

$80.00



IBM QRadar XX29 Server x2 Xeon E5-2650v4 128gb DDR4 10gb SFP NIC picture

IBM QRadar XX29 Server x2 Xeon E5-2650v4 128gb DDR4 10gb SFP NIC

$479.99



Vintage IBM ps/2 8580 Model 80 386 tower server powers on picture

Vintage IBM ps/2 8580 Model 80 386 tower server powers on

$199.95



IBM System x3650 M4 CTO Server 7915-AC1, w/ Powers, Risers, RAID for 8x Drives picture

IBM System x3650 M4 CTO Server 7915-AC1, w/ Powers, Risers, RAID for 8x Drives

$250.00



LOT OF 10  HGST 600GB 10K 2.5

LOT OF 10 HGST 600GB 10K 2.5" SAS HDD Hard Drive dell HP supermicro IBM server

$99.99



 IBM 400GB 1.8

IBM 400GB 1.8" eMLC SAS SSD 12Gbps S846E400Z1GUC 98Y6303 FOR IBM ds8000 SERVER

$36.99