Results 1 to 3 of 3

Thread: Knoppix stopped entering X after installing vnc4server

  1. #1
    Junior Member
    Join Date
    Oct 2012
    Posts
    6

    Unhappy Knoppix stopped entering X after installing vnc4server

    Hello,

    my knoppix was working well, I installed vnc4server, it also worked well. Today I started the machine and to my surprise I cannot enter runlevel 5, it gets stuck. For some time tries, i.e. goes blackscreen, and then back to console with message:

    # The graphical subsystem could not be startet
    or terminated unexpectedly.
    Maybe your graphics adapter or monitor are not auto-configurable.

    Please try to reboot and give some of the Knoppix-Cheatcodes
    at the initial boot:-prompt, which match your graphics adapter.
    Examples:
    knoppix xmodule=radeon (or ati, nv, cirrus, ...)
    knoppix xmodule=fbdev
    knoppix xmodule=vesa
    knoppix hsync=90 vsync=75

    I don't remember doing much more that installing vnc...

    I've looked around the network and didn't found any useful hints. Any ideas what my go wrong? Where to start checking?

  2. #2
    Moderator Moderator
    Join Date
    Jan 2010
    Location
    Asheville, NC, USA
    Posts
    528
    We would need to know what version you're using, and how you are using it, at a minimum. Did you install it, and if so, where? E.g. hard drive, CD/DVD, flash stick, etc. Also, you say you installed vnc4server, but not where and how that was done. We'll be happy to help, we just need some data to work from...

    Cheers!
    Krishna

  3. #3
    Junior Member
    Join Date
    Oct 2012
    Posts
    6
    I managed to fix the problem! I found a tip somewhere to remove .Xauthority file. After that everything worked flawlessly.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


DELL PowerEdge R730XD Server 2x E5-2690v4 2.6GHz =28 Cores 64GB H730 4xRJ45 picture

DELL PowerEdge R730XD Server 2x E5-2690v4 2.6GHz =28 Cores 64GB H730 4xRJ45

$387.00



Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W picture

Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W

$299.99



1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE picture

1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE

$273.00



Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU picture

Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU

$149.95



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330 picture

Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330

$182.65



DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU picture

DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU

$169.95



Cisco UCS C220 M4 1x Xeon E5-2667 V4 3.20GHZ 128GB DDR4-2400MHZ 2x 770W AC PSU picture

Cisco UCS C220 M4 1x Xeon E5-2667 V4 3.20GHZ 128GB DDR4-2400MHZ 2x 770W AC PSU

$129.99



DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45 picture

DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45

$461.00



CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs picture

CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs

$326.67