I have posted a bit here about using legacy grub over time, for example http://knoppix.net/forum/threads/284...t=grub+install
This works also with Knoppix 7.0.5 DVD version, and legacy grub is complete with the old glitches. For example, when installed on what would normally be called /dev/sdb2, we must still call the boot partition (hd0,1), not (hd1,1) which wold be correct. But when the kernel is up, things are set straight, so with the same KNOPPIX on the first partition of an external disk and the first partition of the main internal disk, grub entries in the boot/grub/menu.lst file of the external disk could be:
Code:title Knoppix 6.4.4 64 bits External disk kernel (hd0,1)/boot/knx644/linux64 ramdisk_size=100000 lang=en keyboard=no fromhd=/dev/sdb1 nosound vt.default_utf8=0 apm=power-off initrd=minirt.gz nomce libata.force=noncq loglevel=1 tz=localtime initrd (hd0,1)/boot/knx644/minirt.gz title Knoppix 6.4.4 64 bits Internal disk kernel (hd0,1)/boot/knx644/linux64 ramdisk_size=100000 lang=en keyboard=no fromhd=/dev/sda1 nosound vt.default_utf8=0 apm=power-off initrd=minirt.gz nomce libata.force=noncq loglevel=1 tz=localtime initrd (hd0,1)/boot/knx644/minirt.gz
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch
$475.00
Cisco 3560CG Series 8 Port POE Network Switch WS-C3560CG-8PC-S
$80.00
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$140.00
Cisco Catalyst WS-C2960X-24PD-L GigE PoE 370W, 2 x 10G SFP+, LAN Base H22
$94.00
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 10 @ C
$39.99
Cisco WS-C3560CX-12PC-S 12 Port GbE PoE IP Base Catalyst Managed Switch, TESTED
$174.00
GENUINE CISCO DS-SFP-FC32G-SW SFP NEW SEALED SEE PHOTOS SHIPS FREE
$69.99