Network-Manager is a daemon that listens to interfaces statuses and selects a configuration based on wireless SSIDs or user interaction. It is not a graphical program by itself, but interacts with graphical user interfaces for control, as well as featuring a tiny commandline interface and controls over dbus, so it is quite flexible. By default, network-manager does a lot on its own, like trying DHCP as soon as you plug in a cable into the network card.
Actually, network-manager should respect manual settings in /etc/network/interfaces, also in textmode. In fact, Knoppix contains a script that changes network-managers configuration entirely via /etc/network/interfaces for use in textmode:
"knoppix-networkmanager".
However, after changing /etc/network/interfaces manually, you need to restart network-manager in order for changes to take effect:
sudo /etc/init.d/network-manager restart
Do NOT use ifup/ifdown if network-manager is running. Network-manager will ignore the lock status of ifup/ifdown, while ifup/ifdown will ignore all settings done with network-managers own control programs.
Using static IP addresses in network-manager works fine as long as there is a physical connection, but unfortunately, network-manager does not seem to keep the set IP address when there is no carrier signal on the network cable.
If you want to use the command-line, you have the option of excluding an interface from being handled by network-manager:
sudo nmcli dev disconnect iface eth0
which makes network-manager stop listening on eth0 at all, so you can work with ifup/ifdown again if you are more used to these.
Or just suspend network-manager:
sudo /etc/init.d/network-manager stop
(which is an alternative to using the "nonetworkmanager" cheatcode in Knoppix).
Because of its user-friendly desktop integration in Gnome and KDE (and LXDE, too), most distros are using network-manager by default nowadays. For commandline experts who are used to configure everything manually via ifconfig and route, it's a little uneasy that a daemon is handling all the network stuff and will override manual settings (except in the aforementioned cases), I agree with that. So I would recommend just booting Knoppix with the "nonetworkmanager" option, or use the tricks above to revert to the non-automatic configuration behaviour.
Regards
-Klaus
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
HP/HPE ProLiant AMD Opteron X3216 APU 16 GB RAM MicroServer Gen 10 NO DRIVES
$299.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
HP ProLiant Xeon E3-1220L V2 2.30 GHz 16 GB RAM MicroServer Gen8 NO DRIVES
$199.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
RackChoice 2U Micro ATX Compact Rackmount 2 x 5.25 Chassis Support ATX PS2
$96.00
Supermicro 505-2 Mini-1U Server 5018A-FTN4 16GB 2.4ghz Atom + Rack Ears
$199.00