Network-Manager is a daemon that listens to interfaces statuses and selects a configuration based on wireless SSIDs or user interaction. It is not a graphical program by itself, but interacts with graphical user interfaces for control, as well as featuring a tiny commandline interface and controls over dbus, so it is quite flexible. By default, network-manager does a lot on its own, like trying DHCP as soon as you plug in a cable into the network card.
Actually, network-manager should respect manual settings in /etc/network/interfaces, also in textmode. In fact, Knoppix contains a script that changes network-managers configuration entirely via /etc/network/interfaces for use in textmode:
"knoppix-networkmanager".
However, after changing /etc/network/interfaces manually, you need to restart network-manager in order for changes to take effect:
sudo /etc/init.d/network-manager restart
Do NOT use ifup/ifdown if network-manager is running. Network-manager will ignore the lock status of ifup/ifdown, while ifup/ifdown will ignore all settings done with network-managers own control programs.
Using static IP addresses in network-manager works fine as long as there is a physical connection, but unfortunately, network-manager does not seem to keep the set IP address when there is no carrier signal on the network cable.
If you want to use the command-line, you have the option of excluding an interface from being handled by network-manager:
sudo nmcli dev disconnect iface eth0
which makes network-manager stop listening on eth0 at all, so you can work with ifup/ifdown again if you are more used to these.
Or just suspend network-manager:
sudo /etc/init.d/network-manager stop
(which is an alternative to using the "nonetworkmanager" cheatcode in Knoppix).
Because of its user-friendly desktop integration in Gnome and KDE (and LXDE, too), most distros are using network-manager by default nowadays. For commandline experts who are used to configure everything manually via ifconfig and route, it's a little uneasy that a daemon is handling all the network stuff and will override manual settings (except in the aforementioned cases), I agree with that. So I would recommend just booting Knoppix with the "nonetworkmanager" option, or use the tricks above to revert to the non-automatic configuration behaviour.
Regards
-Klaus
Grandstream GS-HT802 2 Port Analog Telephone Adapter VoIP Phone & Device, Black
$32.00
Lot Of 7 Cisco CP-7945G VOIP Phone With Stand & Handset Business IP Phone 7945
$69.99
Polycom VVX 411 IP VOIP POE Gigabit Telephone [L/N] BUSINESS OFFICE RECEPTION
$24.00
Polycom VVX 410 VoIP IP Phone & Stand Warranty Reset VVX410 2201-46162-001 Lync
$17.98
Cisco CP-7945G VOIP Phone With Stand & Handset Business IP Phone 7945
$3.00
New Cisco 7945G IP VoIP Gigabit GIGE Telephone Phone CP-7945G -
$24.95
Polycom VVX 501 VoIP IP Phone & Stand Blem Warranty VVX501 2201-48500-001
$14.98
Cisco VOIP Business Phone CP-8861-K9 V01 - PoE - Color Screen - Speakerphone
$17.99
Polycom Poly VVX 250 4-Line 2.8" Color Display VoIP IP Business Phone /w Stand
$18.99
Cisco 8841 SIP VoIP Phone - CP-8841-3PCC-K9
$120.00