Network-Manager is a daemon that listens to interfaces statuses and selects a configuration based on wireless SSIDs or user interaction. It is not a graphical program by itself, but interacts with graphical user interfaces for control, as well as featuring a tiny commandline interface and controls over dbus, so it is quite flexible. By default, network-manager does a lot on its own, like trying DHCP as soon as you plug in a cable into the network card.
Actually, network-manager should respect manual settings in /etc/network/interfaces, also in textmode. In fact, Knoppix contains a script that changes network-managers configuration entirely via /etc/network/interfaces for use in textmode:
"knoppix-networkmanager".
However, after changing /etc/network/interfaces manually, you need to restart network-manager in order for changes to take effect:
sudo /etc/init.d/network-manager restart
Do NOT use ifup/ifdown if network-manager is running. Network-manager will ignore the lock status of ifup/ifdown, while ifup/ifdown will ignore all settings done with network-managers own control programs.
Using static IP addresses in network-manager works fine as long as there is a physical connection, but unfortunately, network-manager does not seem to keep the set IP address when there is no carrier signal on the network cable.
If you want to use the command-line, you have the option of excluding an interface from being handled by network-manager:
sudo nmcli dev disconnect iface eth0
which makes network-manager stop listening on eth0 at all, so you can work with ifup/ifdown again if you are more used to these.
Or just suspend network-manager:
sudo /etc/init.d/network-manager stop
(which is an alternative to using the "nonetworkmanager" cheatcode in Knoppix).
Because of its user-friendly desktop integration in Gnome and KDE (and LXDE, too), most distros are using network-manager by default nowadays. For commandline experts who are used to configure everything manually via ifconfig and route, it's a little uneasy that a daemon is handling all the network stuff and will override manual settings (except in the aforementioned cases), I agree with that. So I would recommend just booting Knoppix with the "nonetworkmanager" option, or use the tricks above to revert to the non-automatic configuration behaviour.
Regards
-Klaus
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.59
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.29
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$87.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
WD 5TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0050BBK-WESN
$78.99
Seagate Exos X22 ST22000NM001E 22TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$311.99