Network-Manager is a daemon that listens to interfaces statuses and selects a configuration based on wireless SSIDs or user interaction. It is not a graphical program by itself, but interacts with graphical user interfaces for control, as well as featuring a tiny commandline interface and controls over dbus, so it is quite flexible. By default, network-manager does a lot on its own, like trying DHCP as soon as you plug in a cable into the network card.
Actually, network-manager should respect manual settings in /etc/network/interfaces, also in textmode. In fact, Knoppix contains a script that changes network-managers configuration entirely via /etc/network/interfaces for use in textmode:
"knoppix-networkmanager".
However, after changing /etc/network/interfaces manually, you need to restart network-manager in order for changes to take effect:
sudo /etc/init.d/network-manager restart
Do NOT use ifup/ifdown if network-manager is running. Network-manager will ignore the lock status of ifup/ifdown, while ifup/ifdown will ignore all settings done with network-managers own control programs.
Using static IP addresses in network-manager works fine as long as there is a physical connection, but unfortunately, network-manager does not seem to keep the set IP address when there is no carrier signal on the network cable.
If you want to use the command-line, you have the option of excluding an interface from being handled by network-manager:
sudo nmcli dev disconnect iface eth0
which makes network-manager stop listening on eth0 at all, so you can work with ifup/ifdown again if you are more used to these.
Or just suspend network-manager:
sudo /etc/init.d/network-manager stop
(which is an alternative to using the "nonetworkmanager" cheatcode in Knoppix).
Because of its user-friendly desktop integration in Gnome and KDE (and LXDE, too), most distros are using network-manager by default nowadays. For commandline experts who are used to configure everything manually via ifconfig and route, it's a little uneasy that a daemon is handling all the network stuff and will override manual settings (except in the aforementioned cases), I agree with that. So I would recommend just booting Knoppix with the "nonetworkmanager" option, or use the tricks above to revert to the non-automatic configuration behaviour.
Regards
-Klaus
AMD EPYC 7282 CPU Processor 16 Cores 32 Threads 2.8GHZ up to 3.2GHZ 120W no lock
$76.00
Intel - Core i7-12700K Desktop Processor 12 (8P+4E) Cores up to 5.0 GHz Unloc...
$419.99
AMD Ryzen 9 5950X 16-core 32-thread Desktop Processor
$319.99
Intel - Core i9-12900K Desktop Processor 16 (8P+8E) Cores up to 5.2 GHz Unloc...
$619.99
Intel Xeon E5-2697A V4 2.6GHz CPU Processor 16-Core Socket LGA2011 SR2K1
$39.99
Intel Core i5-6500 3.2GHz 6MB SR2L6 / SR2BX Skt. FCLGA1151 Desktop Processor CPU
$24.50
Intel Core i7-14700K Unlocked Desktop Processor
$409.99
Intel Core i5-12600KF Desktop Processor 10 (6P+4E) Cores up to 4.9 GHz Unlocked.
$145.59
Intel Core i7-13700K 3.40GHz 16-Core CPU LGA1700 BX8071513700K
$339.99
Intel Core i7-3770 3.40GHz 8MB Quad Core Socket LGA1155 CPU Processor SR0PK
$35.00