-
Touch pad scroll not working on knoppix 7.05
Acer Aspire laptop 7741Z-4643 I've just created a new USB boot disk with knoppix 7.05 and the touchpad vertical scroll is either not working or it is very unreliable. On my 7.03 USB boot drive that I still have, the touchpad scroll still works fine when I boot with this drive My suspicion is that, I think there is a table that defines the touch pad location for scroll that is out of whack on 7.05 Stranglely, rarely on 7.05, the scroll, once in a great while the scroll, will work once and rotate the desktop, but can't seem to do it again. Anyone else have the same issue with the laptop touchpad scroll? Ideas? Oddly, in all previous versions of knoppix that I've tried, the touchpad vertical scroll has always worked, before 7.05 and it has not worked with with ubuntu. = = = = Just descovered that executing this command from the terminal window, solves the probelm in 7.0.5 synclient VertEdgeScroll=1 How would I do this automatically?
Last edited by Denver Dave; 01-16-2013 at 06:30 AM.
-
Sorry about the run together paragraphs in the previous post, just figured out I needed to turn the noscript off for this page after I lost the ability to edit the post.
= = = = =
Acer Aspire laptop 7741Z-4643 I've just created a new USB boot disk with knoppix 7.05 and the touchpad vertical scroll is either not working or it is very unreliable. On my 7.03 USB boot drive that I still have, the touchpad scroll still works fine when I boot with this drive
My suspicion is that, I think there is a table that defines the touch pad location for scroll that is out of whack on 7.05 Stranglely, rarely on 7.05, the scroll, once in a great while the scroll, will work once and rotate the desktop, but can't seem to do it again. Anyone else have the same issue with the laptop touchpad scroll? Ideas?
Oddly, in all previous versions of knoppix that I've tried, the touchpad vertical scroll has always worked, before 7.05 and it has not worked with with ubuntu.
= = = =
Just descovered that executing this command from the terminal window, solves the probelm in 7.0.5 synclient VertEdgeScroll=1 How would I do this automatically?
-
Senior Member
registered user
Originally Posted by
Denver Dave
Just descovered that executing this command from the terminal window, solves the probelm in 7.0.5 synclient VertEdgeScroll=1 How would I do this automatically?
You might try adding your synclient command to /etc/X11/Xsession.d/45knoppix.
Here's how I disable my touchpad:
Add synclient TouchpadOff=1 to /etc/X11/Xsession.d/45knoppix.
That is, just add a line to whatever is already there.
I do it this way because adding it to /etc/rc.local doesn't work for me.
-
Thanks - that fixed the touchpad vertical scroll on a permanent basis. Didn't realize how much I used the vertical scroll. Seems like a bug in 7.05 to me, since worked in previous versions.
Note to self and others that don't have a clue:
Tried the file manager - could not edit system files, even after selected show hidden files
Tried sudo pcmanfm (name of file manager), didn't seem to help
From terminal editor: sudo gedit
added: synclient VertEdgeScroll=1; (with the above the last line in 45knoppix
Last edited by Denver Dave; 01-18-2013 at 04:59 AM.
-
Senior Member
registered user
Originally Posted by
Denver Dave
Thanks - that fixed the touchpad vertical scroll on a permanent basis. Didn't realize how much I used the vertical scroll. Seems like a bug in 7.05 to me, since worked in previous versions.
Glad this worked for you, Dave.
I have no opinion on whether your problem is a bug.
However, if you think it is, you might say so on Klaus K's site:
http://lists.debian.org/debian-knoppix
-
I hadn't used knoppix for a while and I installed 7.7.1. Couldn't get my laptop scroll bar to work and I remembered this thread. Still works - thanks.
-
Senior Member
registered user
Originally Posted by
Denver Dave
I hadn't used knoppix for a while and I installed 7.7.1. Couldn't get my laptop scroll bar to work and I remembered this thread. Still works - thanks.
Glad this worked for you, Dave.
There is another approach which I find useful described by Klaus2008 at:
http://knoppix.net/forum/threads/307...ight=autostart
I now use that approach to tweak Touchpad and Caps_Lock functions.
Best Regards.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell R640 8x 2.5" SFF Server iDRAC ENT - Wholesale Custom Build Your Server
$327.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$195.00
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$165.99
Dell PowerEdge R630 Server | 2x Xeon E5-2667v4, 128GB, RAM, H730, Dual 750w PSU
$229.00
Dell PowerEdge R730XD Server 2x E5-2640 V3 -16 Cores H730 32GB RAM 4x RJ45
$268.99
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 32gb / 500gb / 495w
$164.99
Dell PowerEdge R630 Server 2x E5-2690v3 2.60Ghz 24-Core 128GB H330 Rails
$288.85
DELL POWEREDGE C6100 with 4x Nodes 8x Xeon X5660 CPU 96GB RAM no HDD WORKING
$118.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$407.99
Dell Poweredge R330 1U Server | Pick Your v5/v6 CPU & RAM Config | 350w PSU
$194.99