.
I use the measure count to define the frequency of wifi disconnect/reconnects.
count is defined as an alias in my /etc/profile, as follows:
In practice, it works this way:Code:alias count="date '+%h %e %H:%M:%S'; less /var/log/syslog > text; less text | fgrep restart; less text | fgrep -c disconnecting"
knoppix@Microknoppix:~$ count
Jan 17 19:18:36
Jan 17 14:25:56 Microknoppix syslogd 1.5.0#6.2: restart.
30
Given these three lines I deduce I have had 30 disconnect/reconnects in the current session
which began at about 14:26. Doing the subtraction that seems to be about 292/30 or once in
9.7 minutes on average. I know the reconnect time is usually quite small, on the order
of two seconds, usually. I'm currently using g-mode on either router since this gives a
much better result with this measure of performance. my n-mode results are on the order
of less than a minute between disconnects, using this same measure. I conclude my g-mode is
preferable to my n-mode as things stand right now.
This approach requires /var/log/syslog which, using Knoppix7, may be partially observed with
control-alt-F12, but I don't know how to manipulate it as above without providing the actual
log. I do this by adding the following entry to /etc/syslog-knoppix.conf
just below the existing tty12 statement:
Use two tabs to provide the space between none and /var above.Code:*.*;auth,authpriv.none /var/log/syslog
This log is re-established at boot. So, the accumulation of this record is of no consequence
in using a LiveUSB which is never left on-line overnight or when not in use for any significant
time. Needless to say, if you don't reboot often as I do, you may want to consider how much
space is consumed by contiuously recording syslog.
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2620V3 | NO RAM | P244BR | 2xHDD Tray
$179.00
HPE BL460c G9 ProLiant Blade | 2x Xeon E5-2630V3 | 32GB | P244BR | 2x300GB 15K
$299.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 32GB | P204I | 2x900GB 10KRPM
$1499.00
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge M620 Blade Server
$39.99
HP ProLiant BL460c Gen9 Blade 2x E5-2660v3 2.6GHz =20 Cores 64GB P246 650FLB
$196.00