.
I use the measure count to define the frequency of wifi disconnect/reconnects.
count is defined as an alias in my /etc/profile, as follows:
In practice, it works this way:Code:alias count="date '+%h %e %H:%M:%S'; less /var/log/syslog > text; less text | fgrep restart; less text | fgrep -c disconnecting"
knoppix@Microknoppix:~$ count
Jan 17 19:18:36
Jan 17 14:25:56 Microknoppix syslogd 1.5.0#6.2: restart.
30
Given these three lines I deduce I have had 30 disconnect/reconnects in the current session
which began at about 14:26. Doing the subtraction that seems to be about 292/30 or once in
9.7 minutes on average. I know the reconnect time is usually quite small, on the order
of two seconds, usually. I'm currently using g-mode on either router since this gives a
much better result with this measure of performance. my n-mode results are on the order
of less than a minute between disconnects, using this same measure. I conclude my g-mode is
preferable to my n-mode as things stand right now.
This approach requires /var/log/syslog which, using Knoppix7, may be partially observed with
control-alt-F12, but I don't know how to manipulate it as above without providing the actual
log. I do this by adding the following entry to /etc/syslog-knoppix.conf
just below the existing tty12 statement:
Use two tabs to provide the space between none and /var above.Code:*.*;auth,authpriv.none /var/log/syslog
This log is re-established at boot. So, the accumulation of this record is of no consequence
in using a LiveUSB which is never left on-line overnight or when not in use for any significant
time. Needless to say, if you don't reboot often as I do, you may want to consider how much
space is consumed by contiuously recording syslog.
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM
$1419.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$402.38
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
HPE 863442-B21 ProLiant BL460c G10 Blade (2) Intel Xeon Silver CPUs NO HD/NO RAM
$319.00
HPE ProLiant BL460c Gen9 16-Core Blade 779803-S01 (2)CPU on board No RAM/No HDD
$89.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00