The process I am trying to implement is the most logical and generalised one, so please suggest something along the line.
Not feasible, since I already have a Debian 6.0.3 system, it resets the bios according to my localisation values set there, aided by ntpdate. So you have to please suggest another alternative. I have tried TZ cheatcode but that does not work either. I had also run tzselect (=asia/kolkata) here in knoppix, but that too does not work.
The process I am trying to implement is the most logical and generalised one, so please suggest something along the line.
Well, I will read up on it and see what you are talking about. Thanks for all of the help. I still have a lot to learn, so, and time to learn it. Wish I had more time to spend reading this stuff, but, I have to do other things too. I really haven't figured out the Micro Re-Mastering, but, I suppose I will eventually. I will be posting other issues as well.
The UNIX/ LINUX way is:
- always BIOS time = UTC
With Debian I use the crontab:
With dual boot Windows installation you have to register:Code:40 10,15,20 * * * /usr/sbin/ntpdate -v de.pool.ntp.org; /sbin/hwclock -u --systohc
Code:Windows Registry Editor Version 5.00 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\↲ Services\W32Time\TimeProviders\NtpClient] "SpecialPollInterval"=dword:00000e10 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\↲ CurrentVersion\DateTime\Servers] @="1" "1"="de.pool.ntp.org" "2"="time.nist.gov" [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\↲ TimeZoneInformation] "RealTimeIsUniversal"=dword:00000001
Why configure crontab? My system automatically updates the time when I log in to the internet. The ntpdate client listens to the network time servers by itself.
I don't use windoze, so I would not be interested in its registry codes.
Okay, this is one thing that we have got to look into in Knoppix.
But that the BIOS is updated by ntpdate is absolutely confirmed. In doze, if you change time the BIOS time is affected too.
Why not?Why configure crontab?Why do you think so? From man ntpdate:But that the BIOS is updated by ntpdate is absolutely confirmed.ntpdate sets the local date and time by polling the Network Time Protocol (NTP) server(s) given as the server arguments to determine the correct time.
.
I have a nice Dell laptop which came equipped with Windows 7.
I rarely use Windows 7, but it allows the laptop to be very close
to 'Observatory time' since it syncs up my hardware clock with an
ntp server every time it IS used. I also corrects for daylight
savings time, if allowed a peek at the internet. The hardware
clock in question is set to local Eastern US time. I also set
my Knoppix desktop to local 12-hour am/pm format.
I don't use ntpdate or any other Knoppix time correction.
The consequences of this are two as far as I can tell.
1. The result of a date command will erroneously append UTC to
the otherwise very nearly correct local time.
2. There is a small error, currently about 15 seconds, which I
observe by occasionally checking against the USNO.
See: http://tycho.usno.navy.mil/simpletime.html.
If I wanted to tweak the small error, I could spend a few
minutes with Window 7.
If I wanted to tweak the erroneous UTC, I could use an alias
date="date | sed 's\UTC\EST\'" or date="date | sed 's\UTC\EDT\'"
I rarely find the need to do either.
Nor do I care to disturb my Windows 7 which works ok for what it is.
I am sorry, I should have been more elaborate. Actually, I have a localised system, as explained earlier. ntpdate sends that process the ntp data( time and date), and it localises the date time according to my settings(Asia/Kolkata) and rewrites the BIOS on that basis.
Please tell us the output fromCode:cat /proc/driver/rtc; date
- from Debian
- from Knoppix
My values are with Debian
with KnoppixCode:rtc_time : 07:38:25 rtc_date : 2013-01-28 alrm_time : 00:00:00 alrm_date : ****-**-** alarm_IRQ : no alrm_pending : no 24hr : yes periodic_IRQ : no update_IRQ : no HPET_emulated : yes DST_enable : no periodic_freq : 1024 batt_status : okay Mo 28. Jan 08:38:25 CET 2013Timezone for me is "Europe/Berlin"Code:cat /proc/driver/rtc; date rtc_time : 07:41:11 rtc_date : 2013-01-28 alrm_time : 00:00:00 alrm_date : 2013-01-29 alarm_IRQ : no alrm_pending : no update IRQ enabled : no periodic IRQ enabled : no periodic IRQ frequency : 1024 max user IRQ frequency : 64 24hr : yes periodic_IRQ : no update_IRQ : no HPET_emulated : no BCD : yes DST_enable : no periodic_freq : 1024 batt_status : okay Mon Jan 28 08:41:11 CET 2013
Cisco Systems NCS2K-20-SMRFS-L optical multiplexor CISCO EXCESS
$3599.00
Cisco SG110 24 Port Gigabit Ethernet Switch w/ 2 x SFP SG110-24
$117.00
Cisco RV160 VPN Router 4 Gigabit Ethernet Ports RV160-K9-AR
$80.00
CISCO SFP-10G-ER 10-2531-02 10GBASE-ER SFP+ 10G 1550nm 40km 1PCS
$135.00
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W+ C3850-NM-4-1G Mod
$83.00
Cisco Catalyst WS-C2960-48TT-L V02 48 Port Fast Ethernet Switch
$34.00
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$38.99
Cisco WS-C4948-10GE-S 4948-10GE 48 Port Gigabit +10GB Switch w single AC 15.0 OS
$99.99
Cisco C9300-48 48 Port Switch Dual PSU W/C9300-NM-8X P/N: C9300-48U-A Tested
$799.99
Cisco WS-C3850-48P-L 48-Port Gigabit 3850 PoE Switch w/ 715W Network Switch
$41.64