I installed knoppix 7.0.5 on an hard drive and I noticed that the filesystem of knoppix-data.img never got checked.
The first step I took to solve this was to set the properties of the ext2 filesystem so that it was checked everytime
but even in this case the file system didn't get checked, so I took a close look at the init script and I found that in the checkfs() function, the e2fsck program is called using:Code:tune2fs -c 1 /mnt-system/KNOPPIX/knoppix-data.img
but the variable $h has no value in the function, so I think the call to the program should be:Code:runknoppixlib /sbin/e2fsck -y "$h" >/dev/null 2>&1
I'm not a real expert of linux, so I may be wrong. If this is the case, please tell me. In the other case, maybe someone wants to make the correction to the standard init script (or can save some time searching a similar problem).Code:runknoppixlib /sbin/e2fsck -y "$p" >/dev/null 2>&1
Bye
A
DELL PowerEdge R730XD Server 2x E5-2690v4 2.6GHz =28 Cores 64GB H730 4xRJ45
$387.00
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$299.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45
$461.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$169.95
Cisco UCS C220 M4 1x Xeon E5-2667 V4 3.20GHZ 128GB DDR4-2400MHZ 2x 770W AC PSU
$129.99
Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU
$149.95
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$353.33