I installed knoppix 7.0.5 on an hard drive and I noticed that the filesystem of knoppix-data.img never got checked.
The first step I took to solve this was to set the properties of the ext2 filesystem so that it was checked everytime
but even in this case the file system didn't get checked, so I took a close look at the init script and I found that in the checkfs() function, the e2fsck program is called using:Code:tune2fs -c 1 /mnt-system/KNOPPIX/knoppix-data.img
but the variable $h has no value in the function, so I think the call to the program should be:Code:runknoppixlib /sbin/e2fsck -y "$h" >/dev/null 2>&1
I'm not a real expert of linux, so I may be wrong. If this is the case, please tell me. In the other case, maybe someone wants to make the correction to the standard init script (or can save some time searching a similar problem).Code:runknoppixlib /sbin/e2fsck -y "$p" >/dev/null 2>&1
Bye
A
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
WD 5TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0050BBK-WESN
$78.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.08
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$87.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
HGST HDD HUH721010AL5200 10TB 3.5" SAS 12Gb/s Server Hard Disk Drive *READ
$50.89
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Seagate ST8000NM0045 8TB 7.2k SATA 6Gbps 3.5" 4Kn Format Hard Drive Open Box New
$84.99