I installed knoppix 7.0.5 on an hard drive and I noticed that the filesystem of knoppix-data.img never got checked.
The first step I took to solve this was to set the properties of the ext2 filesystem so that it was checked everytime
but even in this case the file system didn't get checked, so I took a close look at the init script and I found that in the checkfs() function, the e2fsck program is called using:Code:tune2fs -c 1 /mnt-system/KNOPPIX/knoppix-data.img
but the variable $h has no value in the function, so I think the call to the program should be:Code:runknoppixlib /sbin/e2fsck -y "$h" >/dev/null 2>&1
I'm not a real expert of linux, so I may be wrong. If this is the case, please tell me. In the other case, maybe someone wants to make the correction to the standard init script (or can save some time searching a similar problem).Code:runknoppixlib /sbin/e2fsck -y "$p" >/dev/null 2>&1
Bye
A
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$179.99
Dell EMC 092GD6 Broadcom 9305-16i LSI Quad Port 4 Port SAS RAID Controller
$84.99
OWC Guardian Maximus Raid Enclosure SATA Hard Drive FireWire
$36.99
Dell PERC H330 PCIe 3.0 x8 RAID Storage Controller 4Y5H1 High Profile
$15.99
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
LSI 8 Port 6Gbps PCIe 3.0 External SAS RAID Card w/ 1GB CacheVault & Low Profile
$29.00
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
9207-8i PCIE3.0 6Gbps HBA LSI FW:P20 IT Mode ZFS FreeNAS unRAID 2* SFF-8087 US
$32.88
Yottamaster 5 Bay RAID Hard Drive Enclosure Type-C B For 2.5" 3.5" SATA HDD SSDs
$131.59
Yottamaster 2 Bay RAID Hard Drive Enclosure USB 3.1 For 2.5" SATA HDD SSD UASP
$56.25