You have to be root if you want to uninstall kernel modules. Therefore issueinstead of 'make uninstall'.Code:sudo make uninstall
Prerequisites as listed in the install.txt of the ndiswrapper-1.58.tar.gz
You need a recent kernel, at least 2.6.14, with header files for the kernel. Make sure there is a link in the kernel source from the modules directory.
This is what I get:
Code:knoppix@Microknoppix:~$ ls /lib/modules/`uname -r`/build arch firmware Kconfig mm security block fs kernel Module.symvers sound crypto include lib net tools debian init linux-headers.revision samples usr drivers ipc Makefile scripts virt knoppix@Microknoppix:~$ cd ~knoppix/ndiswrapper-1.58 knoppix@Microknoppix:~/ndiswrapper-1.58$ make uninstall rm -f /usr/share/man/man8/ndiswrapper.8 rm -f /usr/share/man/man8/loadndisdriver.8 make -C driver uninstall make[1]: Entering directory `/home/knoppix/ndiswrapper-1.58/driver' rm -f /lib/modules/3.6.11/misc/ndiswrapper.ko /sbin/depmod -a 3.6.11 ERROR: openat(/lib/modules/3.6.11, modules.dep.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.dep.bin.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.alias.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.alias.bin.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.softdep.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.symbols.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.symbols.bin.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.builtin.bin.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.devname.tmp, 1101, 644): Permission denied make[1]: Leaving directory `/home/knoppix/ndiswrapper-1.58/driver' make -C utils uninstall make[1]: Entering directory `/home/knoppix/ndiswrapper-1.58/utils' rm -f /sbin/loadndisdriver rm -f /usr/sbin/ndiswrapper rm -f /usr/sbin/ndiswrapper-buginfo make[1]: Leaving directory `/home/knoppix/ndiswrapper-1.58/utils' knoppix@Microknoppix:~/ndiswrapper-1.58$
You have to be root if you want to uninstall kernel modules. Therefore issueinstead of 'make uninstall'.Code:sudo make uninstall
Per the Install instructions I first typed in:
I ignored the error with "make uninstall" then proceeded with instructions.Code:make uninstall make
"Login as root then run"
.Code:make uninstall
I then followed next instructions "Then install windows driver with"
Returned error "command ndiswrapper not found".Code:ndiswrapper -i driver.inf
Also tried
Got the same error.Code:ndiswrapper -i Driver/LSTINDS.INF
Note: "Driver" is the name of the folder with the LSTINDS. INF file.
Last edited by AndyOpie150; 03-29-2013 at 10:01 PM.
I would issue'Driver/LSTINDS.INF' is the path of your INF file.Code:cd /home/knoppix/ndiswrapper-1.58 sudo make uninstall make clean make sudo make install cd /home/knoppix sudo ndiswrapper -i Driver/LSTINDS.INF sudo ndiswrapper -m sudo modprobe ndiswrapper
Thanks. Will give it a try and edit this post with results.
Cant seem to edit my posts now. klaus2008: Was having to many errors with that install to flash drive (-C command not found, /home/knoppix/ndiswrapper-1.58 not a valid directory, etc). Re-installed knoppix 7.0.5 CD version to flash drive and followed advice in post 4. Everything is working great and I'm posting this thru the provided Iceweasel browser. Should have did that before, sorry, thought it was some limitation with the .iso so didn't mention it before. At least we now know that the ndiswraper-1.58 works great on the 7.0.5 CD version. Sorry again about everything else between your 4th post and this one. I don't know a whole lot, just enough to mess things up. Thanks very much for having patience with me and sticking with me, even through my bought of overthinking.
Last edited by AndyOpie150; 03-30-2013 at 06:57 PM.
The ndiswrapper-1.58 works great, but, every time I boot into the USB drive I have to open up a CLi and type in
to get my wireless card to power up.Code:sudo modprobe ndiswrapper
I have tried:
but this just makes my wireles card power on and off whenever I try to connect to the internet.Code:sudo su echo ndiswrapper >> /etc/modules exit
I have since re-installed and set up drivers due to lack of knowledge on how to fix my mistake.
What is the command I need to issue to get the ndiswrapper to work without having to type in the above mentioned command every time I boot into Knoppix?
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$21.50
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$14.50
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$13.50
Crucial 16GB (2x 8GB) Kit DDR3L 1600MHz PC3-12800 UDIMM Desktop 240-Pin CL11 RAM
$22.85
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
A-Tech 32GB 2x 16GB PC4-21300 Laptop SODIMM 260-Pin DDR4 2666 MHz Memory RAM Kit
$59.99
Samsung PC4-19200 PC4 2400T 32GB DDR4 RAM Server Memory
$79.99
Samsung 64GB 4DRx4 PC4-2400 LRDIMM DDR4-19200 ECC Load Reduced Server Memory RAM
$71.99