You have to be root if you want to uninstall kernel modules. Therefore issueinstead of 'make uninstall'.Code:sudo make uninstall
Prerequisites as listed in the install.txt of the ndiswrapper-1.58.tar.gz
You need a recent kernel, at least 2.6.14, with header files for the kernel. Make sure there is a link in the kernel source from the modules directory.
This is what I get:
Code:knoppix@Microknoppix:~$ ls /lib/modules/`uname -r`/build arch firmware Kconfig mm security block fs kernel Module.symvers sound crypto include lib net tools debian init linux-headers.revision samples usr drivers ipc Makefile scripts virt knoppix@Microknoppix:~$ cd ~knoppix/ndiswrapper-1.58 knoppix@Microknoppix:~/ndiswrapper-1.58$ make uninstall rm -f /usr/share/man/man8/ndiswrapper.8 rm -f /usr/share/man/man8/loadndisdriver.8 make -C driver uninstall make[1]: Entering directory `/home/knoppix/ndiswrapper-1.58/driver' rm -f /lib/modules/3.6.11/misc/ndiswrapper.ko /sbin/depmod -a 3.6.11 ERROR: openat(/lib/modules/3.6.11, modules.dep.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.dep.bin.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.alias.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.alias.bin.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.softdep.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.symbols.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.symbols.bin.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.builtin.bin.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.devname.tmp, 1101, 644): Permission denied make[1]: Leaving directory `/home/knoppix/ndiswrapper-1.58/driver' make -C utils uninstall make[1]: Entering directory `/home/knoppix/ndiswrapper-1.58/utils' rm -f /sbin/loadndisdriver rm -f /usr/sbin/ndiswrapper rm -f /usr/sbin/ndiswrapper-buginfo make[1]: Leaving directory `/home/knoppix/ndiswrapper-1.58/utils' knoppix@Microknoppix:~/ndiswrapper-1.58$
You have to be root if you want to uninstall kernel modules. Therefore issueinstead of 'make uninstall'.Code:sudo make uninstall
Per the Install instructions I first typed in:
I ignored the error with "make uninstall" then proceeded with instructions.Code:make uninstall make
"Login as root then run"
.Code:make uninstall
I then followed next instructions "Then install windows driver with"
Returned error "command ndiswrapper not found".Code:ndiswrapper -i driver.inf
Also tried
Got the same error.Code:ndiswrapper -i Driver/LSTINDS.INF
Note: "Driver" is the name of the folder with the LSTINDS. INF file.
Last edited by AndyOpie150; 03-29-2013 at 10:01 PM.
I would issue'Driver/LSTINDS.INF' is the path of your INF file.Code:cd /home/knoppix/ndiswrapper-1.58 sudo make uninstall make clean make sudo make install cd /home/knoppix sudo ndiswrapper -i Driver/LSTINDS.INF sudo ndiswrapper -m sudo modprobe ndiswrapper
Thanks. Will give it a try and edit this post with results.
Cant seem to edit my posts now. klaus2008: Was having to many errors with that install to flash drive (-C command not found, /home/knoppix/ndiswrapper-1.58 not a valid directory, etc). Re-installed knoppix 7.0.5 CD version to flash drive and followed advice in post 4. Everything is working great and I'm posting this thru the provided Iceweasel browser. Should have did that before, sorry, thought it was some limitation with the .iso so didn't mention it before. At least we now know that the ndiswraper-1.58 works great on the 7.0.5 CD version. Sorry again about everything else between your 4th post and this one. I don't know a whole lot, just enough to mess things up. Thanks very much for having patience with me and sticking with me, even through my bought of overthinking.
Last edited by AndyOpie150; 03-30-2013 at 06:57 PM.
The ndiswrapper-1.58 works great, but, every time I boot into the USB drive I have to open up a CLi and type in
to get my wireless card to power up.Code:sudo modprobe ndiswrapper
I have tried:
but this just makes my wireles card power on and off whenever I try to connect to the internet.Code:sudo su echo ndiswrapper >> /etc/modules exit
I have since re-installed and set up drivers due to lack of knowledge on how to fix my mistake.
What is the command I need to issue to get the ndiswrapper to work without having to type in the above mentioned command every time I boot into Knoppix?
Cisco UCS B200 M4 Blade Module 2x Xeon E5-2680 v3 12-Core NO RAM NO HDD
$39.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Sun Microsystems Blade 100 Workstation UltraSPARC-IIe 500MHz 256MB Server No HDD
$95.00
HP P17342-B21 M750 E2286M CTO BLADE SERVER
$269.95
HP Proliant BL460C Gen8 Blade Server 2x 8C E5-2690 192GB Ram
$58.15
🔥 World Of Warcraft Server Blade 🔥
$944.86
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
Google Search Appliance - Dell PowerEdge R710 x2 Xeon X5690 192GB Memory 6TB HDD
$529.99
DELL PEM640 POWEREDGE M640 BLADE SERVER
$539.95
DELL PowerEdge M630 Blade 2x E5-2690v4 2.6GHz =28 Cores 64GB H330 2x10Gb X520
$259.00