You have to be root if you want to uninstall kernel modules. Therefore issueinstead of 'make uninstall'.Code:sudo make uninstall
Prerequisites as listed in the install.txt of the ndiswrapper-1.58.tar.gz
You need a recent kernel, at least 2.6.14, with header files for the kernel. Make sure there is a link in the kernel source from the modules directory.
This is what I get:
Code:knoppix@Microknoppix:~$ ls /lib/modules/`uname -r`/build arch firmware Kconfig mm security block fs kernel Module.symvers sound crypto include lib net tools debian init linux-headers.revision samples usr drivers ipc Makefile scripts virt knoppix@Microknoppix:~$ cd ~knoppix/ndiswrapper-1.58 knoppix@Microknoppix:~/ndiswrapper-1.58$ make uninstall rm -f /usr/share/man/man8/ndiswrapper.8 rm -f /usr/share/man/man8/loadndisdriver.8 make -C driver uninstall make[1]: Entering directory `/home/knoppix/ndiswrapper-1.58/driver' rm -f /lib/modules/3.6.11/misc/ndiswrapper.ko /sbin/depmod -a 3.6.11 ERROR: openat(/lib/modules/3.6.11, modules.dep.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.dep.bin.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.alias.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.alias.bin.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.softdep.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.symbols.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.symbols.bin.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.builtin.bin.tmp, 1101, 644): Permission denied ERROR: openat(/lib/modules/3.6.11, modules.devname.tmp, 1101, 644): Permission denied make[1]: Leaving directory `/home/knoppix/ndiswrapper-1.58/driver' make -C utils uninstall make[1]: Entering directory `/home/knoppix/ndiswrapper-1.58/utils' rm -f /sbin/loadndisdriver rm -f /usr/sbin/ndiswrapper rm -f /usr/sbin/ndiswrapper-buginfo make[1]: Leaving directory `/home/knoppix/ndiswrapper-1.58/utils' knoppix@Microknoppix:~/ndiswrapper-1.58$
You have to be root if you want to uninstall kernel modules. Therefore issueinstead of 'make uninstall'.Code:sudo make uninstall
Per the Install instructions I first typed in:
I ignored the error with "make uninstall" then proceeded with instructions.Code:make uninstall make
"Login as root then run"
.Code:make uninstall
I then followed next instructions "Then install windows driver with"
Returned error "command ndiswrapper not found".Code:ndiswrapper -i driver.inf
Also tried
Got the same error.Code:ndiswrapper -i Driver/LSTINDS.INF
Note: "Driver" is the name of the folder with the LSTINDS. INF file.
Last edited by AndyOpie150; 03-29-2013 at 10:01 PM.
I would issue'Driver/LSTINDS.INF' is the path of your INF file.Code:cd /home/knoppix/ndiswrapper-1.58 sudo make uninstall make clean make sudo make install cd /home/knoppix sudo ndiswrapper -i Driver/LSTINDS.INF sudo ndiswrapper -m sudo modprobe ndiswrapper
Thanks. Will give it a try and edit this post with results.
Cant seem to edit my posts now. klaus2008: Was having to many errors with that install to flash drive (-C command not found, /home/knoppix/ndiswrapper-1.58 not a valid directory, etc). Re-installed knoppix 7.0.5 CD version to flash drive and followed advice in post 4. Everything is working great and I'm posting this thru the provided Iceweasel browser. Should have did that before, sorry, thought it was some limitation with the .iso so didn't mention it before. At least we now know that the ndiswraper-1.58 works great on the 7.0.5 CD version. Sorry again about everything else between your 4th post and this one. I don't know a whole lot, just enough to mess things up. Thanks very much for having patience with me and sticking with me, even through my bought of overthinking.
Last edited by AndyOpie150; 03-30-2013 at 06:57 PM.
The ndiswrapper-1.58 works great, but, every time I boot into the USB drive I have to open up a CLi and type in
to get my wireless card to power up.Code:sudo modprobe ndiswrapper
I have tried:
but this just makes my wireles card power on and off whenever I try to connect to the internet.Code:sudo su echo ndiswrapper >> /etc/modules exit
I have since re-installed and set up drivers due to lack of knowledge on how to fix my mistake.
What is the command I need to issue to get the ndiswrapper to work without having to type in the above mentioned command every time I boot into Knoppix?
DELL PowerEdge R730XD Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$271.00
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$174.95
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$159.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell PowerEdge R710 2.5" 2U Server 2x X5670 2.93GHZ 12-Core 128gb 2x 1TB SAS
$114.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720xd 26HDD 300gb 2.5-inch E5-2697 X 2CPU 384RAM 7.2 Tb HDD 
$180.00
DELL PowerEdge R630 8SFF Server 2x E5-2690v4 2.6GHz =28 Cores 256GB H730 4xRJ45
$562.00
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$334.99