Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: ndiswrapper update

  1. #11
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    Prerequisites as listed in the install.txt of the ndiswrapper-1.58.tar.gz
    You need a recent kernel, at least 2.6.14, with header files for the kernel. Make sure there is a link in the kernel source from the modules directory.

    This is what I get:

    Code:
    knoppix@Microknoppix:~$ ls /lib/modules/`uname -r`/build 
    arch     firmware  Kconfig                 mm              security 
    block    fs        kernel                  Module.symvers  sound 
    crypto   include   lib                     net             tools 
    debian   init      linux-headers.revision  samples         usr 
    drivers  ipc       Makefile                scripts         virt 
    knoppix@Microknoppix:~$ cd ~knoppix/ndiswrapper-1.58 
    knoppix@Microknoppix:~/ndiswrapper-1.58$ make uninstall 
    rm -f /usr/share/man/man8/ndiswrapper.8 
    rm -f /usr/share/man/man8/loadndisdriver.8 
    make -C driver uninstall 
    make[1]: Entering directory `/home/knoppix/ndiswrapper-1.58/driver' 
    rm -f /lib/modules/3.6.11/misc/ndiswrapper.ko 
    /sbin/depmod -a 3.6.11 
    ERROR: openat(/lib/modules/3.6.11, modules.dep.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.dep.bin.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.alias.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.alias.bin.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.softdep.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.symbols.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.symbols.bin.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.builtin.bin.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.devname.tmp, 1101, 644): Permission denied 
    make[1]: Leaving directory `/home/knoppix/ndiswrapper-1.58/driver' 
    make -C utils uninstall 
    make[1]: Entering directory `/home/knoppix/ndiswrapper-1.58/utils' 
    rm -f /sbin/loadndisdriver 
    rm -f /usr/sbin/ndiswrapper 
    rm -f /usr/sbin/ndiswrapper-buginfo 
    make[1]: Leaving directory `/home/knoppix/ndiswrapper-1.58/utils' 
    knoppix@Microknoppix:~/ndiswrapper-1.58$

  2. #12
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    You have to be root if you want to uninstall kernel modules. Therefore issue
    Code:
    sudo make uninstall
    instead of 'make uninstall'.

  3. #13
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    Per the Install instructions I first typed in:
    Code:
    make uninstall
    make
    I ignored the error with "make uninstall" then proceeded with instructions.
    "Login as root then run"
    Code:
    make uninstall
    .

    I then followed next instructions "Then install windows driver with"
    Code:
    ndiswrapper -i driver.inf
    Returned error "command ndiswrapper not found".
    Also tried

    Code:
    ndiswrapper -i Driver/LSTINDS.INF
    Got the same error.

    Note: "Driver" is the name of the folder with the LSTINDS. INF file.
    Last edited by AndyOpie150; 03-29-2013 at 10:01 PM.

  4. #14
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    I would issue
    Code:
    cd /home/knoppix/ndiswrapper-1.58
    sudo make uninstall 
    make clean
    make
    sudo make install
    cd /home/knoppix
    sudo ndiswrapper -i Driver/LSTINDS.INF
    sudo ndiswrapper -m
    sudo modprobe ndiswrapper
    'Driver/LSTINDS.INF' is the path of your INF file.

  5. #15
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    Thanks. Will give it a try and edit this post with results.

  6. #16
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    Cant seem to edit my posts now. klaus2008: Was having to many errors with that install to flash drive (-C command not found, /home/knoppix/ndiswrapper-1.58 not a valid directory, etc). Re-installed knoppix 7.0.5 CD version to flash drive and followed advice in post 4. Everything is working great and I'm posting this thru the provided Iceweasel browser. Should have did that before, sorry, thought it was some limitation with the .iso so didn't mention it before. At least we now know that the ndiswraper-1.58 works great on the 7.0.5 CD version. Sorry again about everything else between your 4th post and this one. I don't know a whole lot, just enough to mess things up. Thanks very much for having patience with me and sticking with me, even through my bought of overthinking.
    Last edited by AndyOpie150; 03-30-2013 at 06:57 PM.

  7. #17
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    The ndiswrapper-1.58 works great, but, every time I boot into the USB drive I have to open up a CLi and type in
    Code:
     
    sudo modprobe ndiswrapper
    to get my wireless card to power up.

    I have tried:
    Code:
     
    sudo su
    echo ndiswrapper >> /etc/modules
    exit
    but this just makes my wireles card power on and off whenever I try to connect to the internet.

    I have since re-installed and set up drivers due to lack of knowledge on how to fix my mistake.
    What is the command I need to issue to get the ndiswrapper to work without having to type in the above mentioned command every time I boot into Knoppix?

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox picture

Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x600Gb SAS, Proxmox

$340.00



Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD picture

Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD

$75.00



Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS picture

Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS

$721.06



H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W picture

H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W

$2512.18



Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB picture

Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB

$510.00



DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45

$275.00



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



Dell PowerEdge R620 Server 2x Xeon  E5-2620 @ 2.0GHz 64GB RAM NO HDDs picture

Dell PowerEdge R620 Server 2x Xeon E5-2620 @ 2.0GHz 64GB RAM NO HDDs

$108.96



Dell PowerEdge R820 Server 4x E5-4620 2.2GHz 32-Core Total 256GB 0HD 2x 1100w  picture

Dell PowerEdge R820 Server 4x E5-4620 2.2GHz 32-Core Total 256GB 0HD 2x 1100w

$315.00



Dell PowerEdge R430 3.5 1U 2x E5-2690 v3 2.6ghz 24-Cores 256gb 4x Trays 2x 550w picture

Dell PowerEdge R430 3.5 1U 2x E5-2690 v3 2.6ghz 24-Cores 256gb 4x Trays 2x 550w

$289.99