Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: ndiswrapper update

  1. #11
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    Prerequisites as listed in the install.txt of the ndiswrapper-1.58.tar.gz
    You need a recent kernel, at least 2.6.14, with header files for the kernel. Make sure there is a link in the kernel source from the modules directory.

    This is what I get:

    Code:
    knoppix@Microknoppix:~$ ls /lib/modules/`uname -r`/build 
    arch     firmware  Kconfig                 mm              security 
    block    fs        kernel                  Module.symvers  sound 
    crypto   include   lib                     net             tools 
    debian   init      linux-headers.revision  samples         usr 
    drivers  ipc       Makefile                scripts         virt 
    knoppix@Microknoppix:~$ cd ~knoppix/ndiswrapper-1.58 
    knoppix@Microknoppix:~/ndiswrapper-1.58$ make uninstall 
    rm -f /usr/share/man/man8/ndiswrapper.8 
    rm -f /usr/share/man/man8/loadndisdriver.8 
    make -C driver uninstall 
    make[1]: Entering directory `/home/knoppix/ndiswrapper-1.58/driver' 
    rm -f /lib/modules/3.6.11/misc/ndiswrapper.ko 
    /sbin/depmod -a 3.6.11 
    ERROR: openat(/lib/modules/3.6.11, modules.dep.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.dep.bin.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.alias.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.alias.bin.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.softdep.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.symbols.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.symbols.bin.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.builtin.bin.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.devname.tmp, 1101, 644): Permission denied 
    make[1]: Leaving directory `/home/knoppix/ndiswrapper-1.58/driver' 
    make -C utils uninstall 
    make[1]: Entering directory `/home/knoppix/ndiswrapper-1.58/utils' 
    rm -f /sbin/loadndisdriver 
    rm -f /usr/sbin/ndiswrapper 
    rm -f /usr/sbin/ndiswrapper-buginfo 
    make[1]: Leaving directory `/home/knoppix/ndiswrapper-1.58/utils' 
    knoppix@Microknoppix:~/ndiswrapper-1.58$

  2. #12
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    You have to be root if you want to uninstall kernel modules. Therefore issue
    Code:
    sudo make uninstall
    instead of 'make uninstall'.

  3. #13
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    Per the Install instructions I first typed in:
    Code:
    make uninstall
    make
    I ignored the error with "make uninstall" then proceeded with instructions.
    "Login as root then run"
    Code:
    make uninstall
    .

    I then followed next instructions "Then install windows driver with"
    Code:
    ndiswrapper -i driver.inf
    Returned error "command ndiswrapper not found".
    Also tried

    Code:
    ndiswrapper -i Driver/LSTINDS.INF
    Got the same error.

    Note: "Driver" is the name of the folder with the LSTINDS. INF file.
    Last edited by AndyOpie150; 03-29-2013 at 10:01 PM.

  4. #14
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    I would issue
    Code:
    cd /home/knoppix/ndiswrapper-1.58
    sudo make uninstall 
    make clean
    make
    sudo make install
    cd /home/knoppix
    sudo ndiswrapper -i Driver/LSTINDS.INF
    sudo ndiswrapper -m
    sudo modprobe ndiswrapper
    'Driver/LSTINDS.INF' is the path of your INF file.

  5. #15
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    Thanks. Will give it a try and edit this post with results.

  6. #16
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    Cant seem to edit my posts now. klaus2008: Was having to many errors with that install to flash drive (-C command not found, /home/knoppix/ndiswrapper-1.58 not a valid directory, etc). Re-installed knoppix 7.0.5 CD version to flash drive and followed advice in post 4. Everything is working great and I'm posting this thru the provided Iceweasel browser. Should have did that before, sorry, thought it was some limitation with the .iso so didn't mention it before. At least we now know that the ndiswraper-1.58 works great on the 7.0.5 CD version. Sorry again about everything else between your 4th post and this one. I don't know a whole lot, just enough to mess things up. Thanks very much for having patience with me and sticking with me, even through my bought of overthinking.
    Last edited by AndyOpie150; 03-30-2013 at 06:57 PM.

  7. #17
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    The ndiswrapper-1.58 works great, but, every time I boot into the USB drive I have to open up a CLi and type in
    Code:
     
    sudo modprobe ndiswrapper
    to get my wireless card to power up.

    I have tried:
    Code:
     
    sudo su
    echo ndiswrapper >> /etc/modules
    exit
    but this just makes my wireles card power on and off whenever I try to connect to the internet.

    I have since re-installed and set up drivers due to lack of knowledge on how to fix my mistake.
    What is the command I need to issue to get the ndiswrapper to work without having to type in the above mentioned command every time I boot into Knoppix?

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch picture

Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch

$37.21



Juniper Networks EX2300-C-12T Compact 12-Port EX2300-C Series Ethernet Switch picture

Juniper Networks EX2300-C-12T Compact 12-Port EX2300-C Series Ethernet Switch

$300.00



Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch picture

Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch

$59.95



Juniper Networks EX3400-48P 48x Gigabit PoE+ RJ45 2x 40Gb/s QSFP+ Switch 2x PSU picture

Juniper Networks EX3400-48P 48x Gigabit PoE+ RJ45 2x 40Gb/s QSFP+ Switch 2x PSU

$119.99



Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+ picture

Juniper EX3300-48P 48-Port 10/100/1000BASE-T (48 PoE+ ports) with 4 SFP+

$74.00



Juniper EX-UM-4X4SFP Uplink Module - 4-Port 10G SFP+ Module #999K picture

Juniper EX-UM-4X4SFP Uplink Module - 4-Port 10G SFP+ Module #999K

$109.00



Juniper EX2300-C-12P 12-Port Gigabit Ethernet PoE+ 2x SFP+ *NO OS* picture

Juniper EX2300-C-12P 12-Port Gigabit Ethernet PoE+ 2x SFP+ *NO OS*

$199.99



JUNIPER EX4200-24PX 24-Port Gigabit PoE+ Managed Ethernet Network Switch picture

JUNIPER EX4200-24PX 24-Port Gigabit PoE+ Managed Ethernet Network Switch

$49.95



Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch with RACK EARS, RESET picture

Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch with RACK EARS, RESET

$46.99



JUNIPER SRX340 SERVICE GATEWAY APPLIANCE Tested/Working #73 picture

JUNIPER SRX340 SERVICE GATEWAY APPLIANCE Tested/Working #73

$111.99