Page 2 of 2 FirstFirst 12
Results 11 to 17 of 17

Thread: ndiswrapper update

  1. #11
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    Prerequisites as listed in the install.txt of the ndiswrapper-1.58.tar.gz
    You need a recent kernel, at least 2.6.14, with header files for the kernel. Make sure there is a link in the kernel source from the modules directory.

    This is what I get:

    Code:
    knoppix@Microknoppix:~$ ls /lib/modules/`uname -r`/build 
    arch     firmware  Kconfig                 mm              security 
    block    fs        kernel                  Module.symvers  sound 
    crypto   include   lib                     net             tools 
    debian   init      linux-headers.revision  samples         usr 
    drivers  ipc       Makefile                scripts         virt 
    knoppix@Microknoppix:~$ cd ~knoppix/ndiswrapper-1.58 
    knoppix@Microknoppix:~/ndiswrapper-1.58$ make uninstall 
    rm -f /usr/share/man/man8/ndiswrapper.8 
    rm -f /usr/share/man/man8/loadndisdriver.8 
    make -C driver uninstall 
    make[1]: Entering directory `/home/knoppix/ndiswrapper-1.58/driver' 
    rm -f /lib/modules/3.6.11/misc/ndiswrapper.ko 
    /sbin/depmod -a 3.6.11 
    ERROR: openat(/lib/modules/3.6.11, modules.dep.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.dep.bin.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.alias.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.alias.bin.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.softdep.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.symbols.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.symbols.bin.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.builtin.bin.tmp, 1101, 644): Permission denied 
    ERROR: openat(/lib/modules/3.6.11, modules.devname.tmp, 1101, 644): Permission denied 
    make[1]: Leaving directory `/home/knoppix/ndiswrapper-1.58/driver' 
    make -C utils uninstall 
    make[1]: Entering directory `/home/knoppix/ndiswrapper-1.58/utils' 
    rm -f /sbin/loadndisdriver 
    rm -f /usr/sbin/ndiswrapper 
    rm -f /usr/sbin/ndiswrapper-buginfo 
    make[1]: Leaving directory `/home/knoppix/ndiswrapper-1.58/utils' 
    knoppix@Microknoppix:~/ndiswrapper-1.58$

  2. #12
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    You have to be root if you want to uninstall kernel modules. Therefore issue
    Code:
    sudo make uninstall
    instead of 'make uninstall'.

  3. #13
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    Per the Install instructions I first typed in:
    Code:
    make uninstall
    make
    I ignored the error with "make uninstall" then proceeded with instructions.
    "Login as root then run"
    Code:
    make uninstall
    .

    I then followed next instructions "Then install windows driver with"
    Code:
    ndiswrapper -i driver.inf
    Returned error "command ndiswrapper not found".
    Also tried

    Code:
    ndiswrapper -i Driver/LSTINDS.INF
    Got the same error.

    Note: "Driver" is the name of the folder with the LSTINDS. INF file.
    Last edited by AndyOpie150; 03-29-2013 at 10:01 PM.

  4. #14
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    I would issue
    Code:
    cd /home/knoppix/ndiswrapper-1.58
    sudo make uninstall 
    make clean
    make
    sudo make install
    cd /home/knoppix
    sudo ndiswrapper -i Driver/LSTINDS.INF
    sudo ndiswrapper -m
    sudo modprobe ndiswrapper
    'Driver/LSTINDS.INF' is the path of your INF file.

  5. #15
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    Thanks. Will give it a try and edit this post with results.

  6. #16
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    Cant seem to edit my posts now. klaus2008: Was having to many errors with that install to flash drive (-C command not found, /home/knoppix/ndiswrapper-1.58 not a valid directory, etc). Re-installed knoppix 7.0.5 CD version to flash drive and followed advice in post 4. Everything is working great and I'm posting this thru the provided Iceweasel browser. Should have did that before, sorry, thought it was some limitation with the .iso so didn't mention it before. At least we now know that the ndiswraper-1.58 works great on the 7.0.5 CD version. Sorry again about everything else between your 4th post and this one. I don't know a whole lot, just enough to mess things up. Thanks very much for having patience with me and sticking with me, even through my bought of overthinking.
    Last edited by AndyOpie150; 03-30-2013 at 06:57 PM.

  7. #17
    Junior Member
    Join Date
    Mar 2013
    Posts
    17
    The ndiswrapper-1.58 works great, but, every time I boot into the USB drive I have to open up a CLi and type in
    Code:
     
    sudo modprobe ndiswrapper
    to get my wireless card to power up.

    I have tried:
    Code:
     
    sudo su
    echo ndiswrapper >> /etc/modules
    exit
    but this just makes my wireles card power on and off whenever I try to connect to the internet.

    I have since re-installed and set up drivers due to lack of knowledge on how to fix my mistake.
    What is the command I need to issue to get the ndiswrapper to work without having to type in the above mentioned command every time I boot into Knoppix?

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox picture

Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox

$340.00



CISCO MCS 7800 (2x) Intel Xeon @ 2.33 GHz 4GB Ram, NO HDD picture

CISCO MCS 7800 (2x) Intel Xeon @ 2.33 GHz 4GB Ram, NO HDD

$44.99



HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar picture

HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar

$304.35



Dell PowerEdge R730 8SFF 2x E5-2660 v3 = 20 Cores 128/256GB 3x 600/900GB H730 picture

Dell PowerEdge R730 8SFF 2x E5-2660 v3 = 20 Cores 128/256GB 3x 600/900GB H730

$349.99



Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7 picture

Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7

$17.99



Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU picture

Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU

$44.99



Intel Xeon E5-2697 v2 2.7GHz 30M 12-Core LGA2011 CPU Processor SR19H picture

Intel Xeon E5-2697 v2 2.7GHz 30M 12-Core LGA2011 CPU Processor SR19H

$27.99



HP Z4G4 Intel Xeon W2133-3.6 GHz, 256 NVME, 6TB HDD, 32GB RAM P620 NO OS picture

HP Z4G4 Intel Xeon W2133-3.6 GHz, 256 NVME, 6TB HDD, 32GB RAM P620 NO OS

$265.00



HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45 picture

HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45

$353.00



DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45

$274.00