-
Senior Member
registered user
Using /etc/profile for small programs
.
It may be noted that you can park some useful small programs in /etc/profile,
as opposed to having many small programs just hanging around. Sometimes the
syntax seems a bit more challenging than the usual bash, but workable. These
are composed as root, but execute as knoppix. For example look at the
Count, Channel and Keep snippets in my /etc/profile.
Code:
# /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
# and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games"
# set PATH so it includes user's private bin if it exists
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++ a few lines deleted here for clarity +++++++++++++++++++++++++
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
alias su="sudo su"
umask 022
Count() { # Aid to counting wifi disconnects over time
date '+%h %e %H:%M:%S' ; less /var/log/syslog |
grep restart; less /var/log/syslog | grep -c disconnecting
}
Channel() { # Aid to assessing who's on wifi channels 1 to 11
sudo iwlist wlan0 scan | grep -e Freq -A 3 |
grep "(Channel $1)" -A 3 | grep -v key
}
Keep() { # Aid to backing-up unique user files to /mnt-system
cd /; KEEP=/mnt-system/keep$(date +"%m%d%H").tar.gz
echo -e 'Compressing data; patience, this may take a little time..\c'
tar -cz --exclude */.gvfs/* -f $KEEP \
home/knoppix/ etc/profile etc/rc.local \
etc/X11/Xsession.d/45* etc/syslog-knoppix.conf \
mnt-system/boot/syslinux/syslinux.cfg
echo ".Done."; echo "Restore using the command, tar -xzf '$KEEP' -C /"
}
These snippets are to be executed in an lxterminal as knoppix, of course.
Last edited by utu; 02-25-2013 at 12:06 AM.
-
Senior Member
registered user
Countering .gvfs due to PCManFM
.
A hidden user mount point directory .gvfs occurs in Knoppix's /home/knoppix when some programs
such as PCManFM are first activated. This hidden file must be taken into account for some operations
one might choose to perform.
One of the more clever approaches to handling this nuisance may be found at post #10 of
http://forums.opensuse.org/english/g...nied-gvfs.html
This approach takes care of removing .gvfs after its appearance on first using PCManFM
for one boot-up session. I've added this as a 'one-liner' to my /etc/profile. Rm.gvfs works only
when called by root; I use a root lxterminal for this command.
Code:
Rm.gvfs () { # Remove user mount directory .gvfs
umount /home/knoppix/.gvfs; find . -inum 554009 -exec rm{} \;; rm -rf .gvfs
}
Be careful making small changes on this command; even the punctuation is critical.
I am not aware what other programs may also cause the appearance of .gvfs.
If there are others, some revision of this approach may be necessary.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets
$139.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 869102-001 Smart Array E208i-a SR Gen10 Storage Controller RAID SP: 871039
$129.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99