Results 1 to 2 of 2

Thread: Using /etc/profile for small programs

  1. #1
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631

    Using /etc/profile for small programs

    .
    It may be noted that you can park some useful small programs in /etc/profile,
    as opposed to having many small programs just hanging around. Sometimes the
    syntax seems a bit more challenging than the usual bash, but workable. These
    are composed as root, but execute as knoppix. For example look at the
    Count, Channel and Keep snippets in my /etc/profile.
    Code:
    # /etc/profile: system-wide .profile file for the Bourne shell (sh(1))
    # and Bourne compatible shells (bash(1), ksh(1), ash(1), ...).
    
    PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games"
    # set PATH so it includes user's private bin if it exists
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    ++++++++++++++ a few lines deleted here for clarity +++++++++++++++++++++++++
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    alias su="sudo su"
    umask 022
    
    Count() { # Aid to counting wifi disconnects over time
    date '+%h %e %H:%M:%S' ; less /var/log/syslog | 
    grep restart; less /var/log/syslog | grep -c disconnecting
    }
    Channel() { # Aid to assessing who's on wifi channels 1 to 11
    sudo iwlist wlan0 scan | grep -e Freq -A 3 |
    grep "(Channel $1)" -A 3 | grep -v key 
    }
    Keep() { # Aid to backing-up unique user files to /mnt-system
    cd /; KEEP=/mnt-system/keep$(date +"%m%d%H").tar.gz
    echo -e 'Compressing data; patience, this may take a little time..\c'
    tar -cz --exclude */.gvfs/* -f  $KEEP \
                     home/knoppix/      etc/profile      etc/rc.local \
                     etc/X11/Xsession.d/45*   etc/syslog-knoppix.conf \
                     mnt-system/boot/syslinux/syslinux.cfg
    echo ".Done."; echo "Restore using the command, tar -xzf '$KEEP' -C /"
    }
    These snippets are to be executed in an lxterminal as knoppix, of course.
    Last edited by utu; 02-25-2013 at 12:06 AM.

  2. #2
    Senior Member registered user
    Join Date
    May 2006
    Location
    Columbia, Maryland USA
    Posts
    1,631

    Countering .gvfs due to PCManFM

    .
    A hidden user mount point directory .gvfs occurs in Knoppix's /home/knoppix when some programs
    such as PCManFM are first activated. This hidden file must be taken into account for some operations
    one might choose to perform.

    One of the more clever approaches to handling this nuisance may be found at post #10 of
    http://forums.opensuse.org/english/g...nied-gvfs.html

    This approach takes care of removing .gvfs after its appearance on first using PCManFM
    for one boot-up session. I've added this as a 'one-liner' to my /etc/profile. Rm.gvfs works only
    when called by root; I use a root lxterminal for this command.

    Code:
    Rm.gvfs () { # Remove user mount directory .gvfs
    umount /home/knoppix/.gvfs; find . -inum 554009 -exec rm{} \;; rm -rf .gvfs
    }
    Be careful making small changes on this command; even the punctuation is critical.
    I am not aware what other programs may also cause the appearance of .gvfs.
    If there are others, some revision of this approach may be necessary.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Juniper MX104-AC 4 MIC Slot Chassis w/ 2x RE-S-MX104 and 2x PWR-MX104-AC picture

Juniper MX104-AC 4 MIC Slot Chassis w/ 2x RE-S-MX104 and 2x PWR-MX104-AC

$1899.00



*New* MIC-MRATE Juniper 12-Port Multi-Rate MIC module picture

*New* MIC-MRATE Juniper 12-Port Multi-Rate MIC module

$749.00



Juniper 48-Port GbE PoE+ & 4-Port 10GB SFP+ Managed Network Switch EX3300-48P picture

Juniper 48-Port GbE PoE+ & 4-Port 10GB SFP+ Managed Network Switch EX3300-48P

$49.99



Juniper 48-Port PoE GbE Network Switch  w/ Dual Power Supplies F B EX4300-48P picture

Juniper 48-Port PoE GbE Network Switch w/ Dual Power Supplies F B EX4300-48P

$178.99



Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch picture

Juniper Networks EX2300-24P 24 Port Gigabit PoE 4 SFP 1/10G Network Switch

$119.00



Juniper EX4600-40F-AFO 24x SFP+/SFP & 4x QSFP+ Ports Switch 2XPSU TESTED picture

Juniper EX4600-40F-AFO 24x SFP+/SFP & 4x QSFP+ Ports Switch 2XPSU TESTED

$800.95



Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod picture

Juniper EX4300-48T 48 Port 1G 4 QSFP 40G Dual PSU AFO w/ Rails, EX-UM-4X4SFP Mod

$169.00



Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord picture

Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord

$54.99



Juniper Networks SRX550 Services Gateway Security Appliance with 6x XGPIM 2x PSU picture

Juniper Networks SRX550 Services Gateway Security Appliance with 6x XGPIM 2x PSU

$499.00



Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested picture

Juniper QFX5100-48S 48-Port 10GbE SFP+ 6x40GbE QSFP Network Switch w/Ears Tested

$599.99