nobody with an explanation???
Hello,
i have made a usb stick (8 gigs) with the knoppix cd version (7.0.5).
i have allocated the remaining 6.7 gigs (maximum size that was available) for persistance at first boot on the stick. when i type the command df -h in the console it shows taht i have only 2.7 gig free , i have only installed a flshplayer, python3.3 and audacious. these programs couldn`t be more the lets say 100mb. why do i have so little free space or what is using up the free space??
nobody with an explanation???
Screenshot from 2.jpg
there you go
If you use Flash disk installation of Knoppix, the maximum size for persistent memory is 4 GB - except when you select experimental version. The line at '/dev/loop0...' shows you your persistent memory.i have allocated the remaining 6.7 gigs (maximum size that was available) for persistance at first boot on the stick.
right... everything adds up now. ok thanx
Oracle 7085209 LSI MegaRAID SAS 9361-8i 1GB Cache 12Gbps SAS/SATA PCIe RAID Card
$28.20
LSI 9207-8i 8-Port SAS Non-RAID 6GBPS PCIe Host Bus Adapter
$34.95
Cisco UCS LSI MegaRAID 9271CV-8I SAS2308 PCIe SAS Internal RAID Controller
$28.00
LSI 9223-8I 6GBPS PCIe SAS Internal RAID Controller
$22.75
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$39.95
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$82.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
NEW LSI MEGARAID SAS 9361-8i 12GB/s SAS + SATA RAID CONTROLLER CARD PCIe x8 3.0
$99.00