Tell us the output fromCode:df -h
Hello
I've installed last release of Knoppix on a USB key and it works fine, EXCEPT one thing :
Persistence is not working (and maybe not existing)
2 times, at the startup, I've seen some menus appearing on the screen for 5 seconds and dissapear and it seems I've seen about persistence setting (not sure..)
Anyway I'm now unable to find any menu or setting for persistence on usb key
Thanks for your help
Dom
Tell us the output fromCode:df -h
THANKS FOR YOUR ANSWER OUTPUT IS
knoppix@Microknoppix:~$ df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 20G 3.0G 17G 16% /
/dev/root 20G 3.0G 17G 16% /
tmpfs 2.0G 8.0K 2.0G 1% /tmp
udev 20M 4.0K 20M 1% /dev
tmpfs 2.0G 0 2.0G 0% /dev/shm
knoppix@Microknoppix:~$
Last edited by Werner P. Schulz; 03-15-2013 at 10:16 AM.
Hello Werner
at least I think I'e found what happened..
Ive created the usb key using linux usb creator..
Then, from the pc started with this key, I have launched the knoppix program wich allow to install on a flash disk.
I have inserted another usb key and at the end, the process ask you the size of persistence you want on your key.
I have to check now but I'm sure it works
Thanks again and if this can help another user...
Dominique
At present there is an error within the Wiki and you cannot read what I've changed at Hard drive installation. New version: ........
--------------------
In the meantime the problem with the Wiki has been solved; therefore I've deleted the remaining of my posting at this position.
Last edited by Werner P. Schulz; 03-30-2013 at 01:19 PM.
interesting! I'd like to install Knoppix on a netbook that has 2 small flashdisks on the mother: sda1 (4 Gb) and sdc1 (8 Gb). How is it possible to install the Knoppix (DVD version if possible) on sda1 (should be Fat32?) and an AES file on sdc1? everything was really easier with Knoppix 5... thanks if you have an idea...
Oops missing part: at least, how to install the OS (DVD version) on sdc1 and the AES data on sda1?
You can do a "HD install" (not "Flash disk Install to HD") to sdc1, mount '/home/' on '/dev/sda1' and encrypt '/home/knoppix/'.
With "Flash disk install" you can only use partitions on the same device.
Hard drive Installation
I'll try that, thanks!
hmm... I used the 'Knoppix HD install' in the 'KNOPPIX' menu, but never I was asked to create the encrypted persistent file how can I do that? I was a Knoppix5 user, everything was automatic... I am lost this time! Something is missing in the Wiki for beginners with Knoppix7 ? PS I have a free sda1 (FAT32) while the OS is on sdb2, but why do I need to do mount /dev/sdb2 /media/sdb2 manualy after each reboot? PPS I don't find the help file of the HD installer.
Last edited by user89; 03-31-2013 at 10:04 PM.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Hynix 2x 8GB (16GB) PC4-19200 DDR4-2400MHz 288Pin Desktop Memory Module
$18.99
Kingston 16GB 2Rx8 PC4-2400T-SB1-11 Laptop Memory K821PJ-MID Tested Working
$17.99
Samsung 16GB 2Rx8 PC4-2400T-SE1-11 Laptop Memory M471A2K43CB1-CRC Tested Working
$17.99
Micron 16GB 2Rx8 PC4-2400T-SE1-11 Laptop Memory MTA16ATF2G64HZ-2G3E1 Tested
$17.99
Micron 8GB DDR4 1Rx16 PC4-3200AA Laptop RAM Memory MTA4ATF1G64HZ-3G2E2
$10.00
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$13.50
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$54.99
A-Tech 128GB 4x 32GB 2Rx4 PC4-19200R DDR4 2400 ECC REG RDIMM Server Memory RAM
$191.96
CORSAIR Vengeance RGB Pro 32GB (2 x 16GB) 288-Pin PC RAM DDR4 3600 (PC4 28800)
$77.95