Hi all, I often set up routers and other devices that start off with default IP addresses that aren't in the "normal" range of private addresses. For example, a Linksys WPG54G device has the default fixed address of 192.168.1.200, but my network has addresses on 192.168.0.* range with DHCP. So how to access the web configuration when you're on a "different" network? Easy peasy. Just launch a terminal, and type "sudo ifconfig 192.168.1.1 up" to assign yourself a address in the 192.168.1.* range. Then you should be able to "ping 192.168.1.200" and get a response. Now you can launch a web browser and do the web configuration on the router or other device. When you want to go back to your normal DHCP, just type "sudo ifconfig down" and wait until the icon on the notification area says "network disconnected", then "sudo ifconfig up" and you will get your DHCP assigned ip address back.
12TB 7200RPM 256MB Cache SATA 6.0Gb/s 3.5" Internal NAS Hard Drive - 0753F0
$139.95
Certified Refurbished 2TB WD Elements Portable Hard Drive - RWDBU6Y0020BBK-WESN
$49.99
Certified Refurbished 5TB WD Elements Portable Hard Drive - RWDBU6Y0050BBK-WESN
$89.99
Seagate IronWolf 12TB 7200RPM SATA 6Gb/s 256MB 3.5" NAS Hard Drive ST12000VN0007
$134.99
HGST Ultrastar HUH728080ALE604 (0F23668) 8TB 7200RPM SATA 6Gb/s 3.5" Hard Drive
$87.99
WD HGST Ultrastar HC520 12TB 7.2K RPM SATA 3.5" HDD HUH721212ALE601 0F29596
$118.88
HGST 14TB SATA 6G 7.2K 3.5 HDD USE ONLY ON SERVER WITH SMR Ctrl HSH721414ALE6M0
$99.99
WD HGST DC HC520 12TB 7.2K SAS 12Gb/s 3.5" 4Kn HDD HUH721212AL4200 - 100% Health
$109.99
Seagate Enterprise Capacity 8TB 7200 RPM Internal Hard Drive ST8000NM0045
$139.99
Hitachi Ultrastar HUA723030ALA640 3TB 7200 RPM 64MB SATA 3.0Gb/s 3.5" Hard Drive
$49.49