Hi all, I often set up routers and other devices that start off with default IP addresses that aren't in the "normal" range of private addresses. For example, a Linksys WPG54G device has the default fixed address of 192.168.1.200, but my network has addresses on 192.168.0.* range with DHCP. So how to access the web configuration when you're on a "different" network? Easy peasy. Just launch a terminal, and type "sudo ifconfig 192.168.1.1 up" to assign yourself a address in the 192.168.1.* range. Then you should be able to "ping 192.168.1.200" and get a response. Now you can launch a web browser and do the web configuration on the router or other device. When you want to go back to your normal DHCP, just type "sudo ifconfig down" and wait until the icon on the notification area says "network disconnected", then "sudo ifconfig up" and you will get your DHCP assigned ip address back.
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram Dual 256GB SSD K420 Linux GA
$161.24
Dell Precision 5810 Workstation Xeon E5-1650 6C 3.5GHz 16GB 500GB Win10 K2200
$115.94
Apple MAC Pro A1481 Late 2013 Xeon Quad-Core 3.7GHz 32GB 1TB SSD FirePro D300
$285.00
Intel Xeon E5-2667 V4 SR2P5 (3.2GHZ/8-CORE/25MB/135W) PROCESSOR CPU
$28.99
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$3.96
SR3J5 INTEL XEON GOLD 6154 3.00GHZ CPU PROCESSOR
$170.00
Genuine Intel Xeon E5-2680V4 2.40Ghz 14-Core 35MB LGA2011 CPU P/N: SR2N7
$14.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$32.79
Intel Xeon E5-2697 v4 2.3GHz 18-Core Processor CPU LGA2011 SR2JV
$49.99
Apple MAC Pro A1481 Late 2013 Xeon Quad-Core 3.7GHz 16GB 1TB SSD FirePro D300
$235.00