Hi all, I often set up routers and other devices that start off with default IP addresses that aren't in the "normal" range of private addresses. For example, a Linksys WPG54G device has the default fixed address of 192.168.1.200, but my network has addresses on 192.168.0.* range with DHCP. So how to access the web configuration when you're on a "different" network? Easy peasy. Just launch a terminal, and type "sudo ifconfig 192.168.1.1 up" to assign yourself a address in the 192.168.1.* range. Then you should be able to "ping 192.168.1.200" and get a response. Now you can launch a web browser and do the web configuration on the router or other device. When you want to go back to your normal DHCP, just type "sudo ifconfig down" and wait until the icon on the notification area says "network disconnected", then "sudo ifconfig up" and you will get your DHCP assigned ip address back.
IBM System X3250 M3 Server 8GB RAM Intel Xeon x3440 2.53ghz (NO HDD)
$36.53
IBM Server Rack Cabinet 9308-RC4
$209.00
IBM System p5 9131-52A 3.5" 4-Bay Server 80P6787 1 CPU 2GB 6 HD CADDIES TAPE BU
$250.00
$5000.00
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6Core 64GB RAM No HDD Server System
$359.99
IBM System x3550 M3 Dual Intel Xeon X5650 @2.67GHz 32GB RAM No HDD
$68.50
IBM Power8 |S822 8284-22A 12-Bay Server | 1x 00UM260 CPU, 128GB RAM, No HDD's
$237.15
COMPLETE IBM 9009 41A ISERIES POWER9 ENTRY LEVEL SERVER FULLY TESTED AND WORKING
$3550.00
IBM Server System X3100 M4 | Xeon @ 3.10 Ghz | 8GB | 250GB HDD No OS (IG-PC26)
$112.95
IBM QRadar xx29 Server 4412Q2A
$209.99