Hi all, I often set up routers and other devices that start off with default IP addresses that aren't in the "normal" range of private addresses. For example, a Linksys WPG54G device has the default fixed address of 192.168.1.200, but my network has addresses on 192.168.0.* range with DHCP. So how to access the web configuration when you're on a "different" network? Easy peasy. Just launch a terminal, and type "sudo ifconfig 192.168.1.1 up" to assign yourself a address in the 192.168.1.* range. Then you should be able to "ping 192.168.1.200" and get a response. Now you can launch a web browser and do the web configuration on the router or other device. When you want to go back to your normal DHCP, just type "sudo ifconfig down" and wait until the icon on the notification area says "network disconnected", then "sudo ifconfig up" and you will get your DHCP assigned ip address back.
2024 Lenovo IdeaPad Laptop Notebook 15.6" Intel Processor Upto 20GB RAM 1TB SSD
$319.00
SAMSUNG 2.5 inch SATA III SSD 870 EVO 2TB 1TB 500 GB 250GB Solid State Drive lot
$123.49
SGIN Laptop 14/15.6/17.3 inch Computer 2.9GHz 24GB RAM 256GB 512GB 1TB SSD HDMI
$209.00
SAMSUNG SSD 870 EVO 2.5" SATA III Solid State Drive 2TB 1TB 500GB 250GB lot
$53.72
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$47.99
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$46.99
Samsung 1TB MZ-76E1T0 860 EVO 2.5" SATA III SSD
$39.95
Patriot P300 128G 256GB 512GB 1TB 2TB M.2 2280 PCIe Gen3x4 NVMe Internal SSD Lot
$48.99
Dell Latitude Laptop 14” FHD Core i7 11th Gen 4.8GHz 16GB RAM 1TB SSD Windows 11
$410.94
Apple Macbook Pro 13.3” 2.5GHz intel Core i5 16GB RAM 1TB HDD Turbo🔥
$249.00