Look at http://linux.die.net/man/8/depmod and tryShould I be able to download and install a modules.dep? Is it platform-dependent?Code:sudo depmod -a 2.6.19
Hi! I'm working on a system which has an embedded PowerPC and Microknoppix (kernel version 2.6.19).
I need to get it to work with a USB device which has some kind of USB-Serial converter chip in it. The manufacturer's website gives the following instructions for Linux:
To load the generic USBSerial driver, enter the following string:
modprobe usbserial vendor=0x213e product=0x000a
However, I get the following error:
FATAL: Could not load /lib/modules/2.6.19/modules.dep: No such file or directory
Here is the listing of /lib/modules:
-rw-r--r-- 1 root root 12415 Sep 7 2007 ccduevent.ko
-rw-r--r-- 1 500 ccdu 23410 Nov 14 2008 i2c-core.ko
-rw-r--r-- 1 500 ccdu 10107 Nov 14 2008 i2c-dev.ko
-rw-r--r-- 1 500 ccdu 7932 Nov 14 2008 i2c-mpc.ko
-rw-r--r-- 1 root root 107572 Jun 29 2007 jffs2.ko
-rw-r--r-- 1 root root 6290 Jun 4 2007 wdog83xx.ko
-rw-r--r-- 1 root root 20852 Jun 29 2007 zlib_deflate.ko
-rw-r--r-- 1 root root 16092 Jun 29 2007 zlib_inflate.ko
So I guess that modules.dep should tell modprobe what it needs and where to find it, and that it has been left out of this Microknoppix version to save space. Am I on the right track?
Should I be able to download and install a modules.dep? Is it platform-dependent?
Or, should I be going about this another way?
The USB device should create a virtual com port, which (in theory) I can open from my C program like a normal serial port. If that works I will be very happy as i can get back to writing code (the real work!).
All I know about the USB part of the device is that it is "vendor=0x213e product=0x000a". However, I can't find any info on this vendor or product with Google.
Any suggestions, including suggestions of any other forums where this question might be more appropriate, would be greatly appreciated!
Thanks.
Look at http://linux.die.net/man/8/depmod and tryShould I be able to download and install a modules.dep? Is it platform-dependent?Code:sudo depmod -a 2.6.19
Thanks! I had to create /lib/modules/2.6.19/ but then it worked. However, now when I run modprobe I get the error:
FATAL: Module usbserial not found.
I guess I have to face the fact that this kernel doesn't have USB-Serial support built in. I've been trying to compile a module as I have some source code for a driver for the specific device, but cross-platform kernel module compilation is a bit beyond me...
HP ProLiant Xeon E3-1220L V2 16 GB RAM 2.30 GHz MicroServer Gen8 NO DRIVES
$174.99
HP PROLIANT MICROSERVER MICRO SERVER HSTNS-5151 T4 Used.
$45.00
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
Supermicro Server Tower Xeon BOOTS E5-2620 v4 2.10GHz 64GB RAM NO HDD NO OS
$199.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
HP PROLIANT ML30 GEN9 INTEL XEON E3-1230 V6 3.50 GHz 16GB RAM SKU#55344
$164.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00