Hi all..
I am new on Linux.
I prepared an usb flash includes diffrent Knoppix Distros.
I used Grub4Dos for boot Knoppıx 7.05 DVD.iso
My USB flash is like this.
====================
grldr
menu.lst
...
etc
ISO <Folder>
Knoppix.iso
Slax.iso
...
Etc
==================
I succesfully booted Knoppix. But after I booted Knoppix, I see that My USB Flash drive is not shown completely. Only content of Knoppix.iso is accessible.
When I check from Gparted , I shows me : /dev/sdb1 mounted /mnt-iso
I need to access whole usb stick.
How can I manage this ?
Thank you in advance...
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
IBM LSI SAS9220-8i M1015 46M0861 SAS/SATA PCI-e RAID Controller Both brackets
$139.00
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Lot of 4 - Genuine Dell (62P9H) PERC H710 512MB Mini Blade 6Gbps SAS Raid
$49.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49