You can also download from the Mirrors the Knoppix-bootonly ISO and burn it or you can use my remaster-script and create a Knoppix Boot-CD
Hi all, I have a desktop that has a finicky combo cdrw/dvdrom drive that doesn't like dvd+/-r at all. So how to boot a knoppix live dvd? I downloaded the knoppix live cd and booted it, then got the knoppix prompt and hit enter, and waited until the moment when the initial kernel is loaded and begins to run and removed the cd boot disk from the drive while it says "Booting the kernel". If your timing is right (you have a couple of seconds while the kernel boots), then knoppix searches for the rest of the knoppix data and will systematically go through all the devices attached to the usb bus. If you have a flash drive that you've manually copied the knoppix dvd contents to, knoppix will find it. I tried this with a fat32 usb flash drive. You can also have a usb dvd drive with a knoppix live dvd in it. Just make sure that you use the same version of knoppix for the boot cd and the dvd or the copied files.
You can also download from the Mirrors the Knoppix-bootonly ISO and burn it or you can use my remaster-script and create a Knoppix Boot-CD
CISCO UCSB-B200-M5 UCS B200 M5 BLADE SERVER - CAN BUILD TO SPEC
$495.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
HP ProLiant BL460c Gen9 Blade 2x E5-2690v4 2.6GHz =28 Cores 32GB P246 650FLB
$223.00
DELL PowerEdge M630 Blade 2x E5-2680v4 2.4GHz =28 Cores 128GB H330 2x10Gb X520
$275.00
HP ProLiant BL460c Gen9 Blade Server Intel Xeon E5-2698 v3 - 512GB RAM
$255.42
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$59.99
Sun Microsystems Blade 100 Workstation UltraSPARC-IIe 500MHz 256MB Server No HDD
$95.00
Dell PowerEdge M620 Blade Server 2x 10C E5-2690v2 64GB Ram 2x 600GB 10k HDD
$125.00
Dell PowerEdge FC430 Blade with 2 x Xeon 2680v3 CPUs
$120.00
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99