I got the knoppix latest version. Booted with knoppix64 from DVD. uname shows
that it is using the 64 bit version. Cool. Installed to hard drive, but it installs 32 bit?
I installed it to an SSD drive which makes it very fast, but not all of the memory is
recognized.
Another thing is that version 7 doesn't allow the Browse for smb printers. Version 6
works perfectly and finds my XP host and printer. Everything is good with that.
Wireless detected perfectly in knoppix 7. How do I get rid of the exploding windows
when they close. I cannot find out how to change that. It should be an easy right?
Thanks - you guys are all great. Gals too.
Thank you so much. Could not find it!!
I tried to boot with a DVD and knoppix64 fromhd=/dev/sda. It is looking for a usb. sda is the hard drive. How would I
get it to see the hard drive. It also says my SSD is not partitioned. I thought I did that when installed it to the hard drive.
Hmmm. I think if I tried to use gpart I would lose all my data. No big deal, since I can start over if needed.
What happens if you tryWhat is the output fromCode:knoppix fromhd=/dev/sda1andCode:blkidCode:fdisk -l
Thanks Werner!
root@Microknoppix:/home/knoppix# blkid:
/dev/zram0: UUID="3e104d0a-d92e-44bb-b375-02cbb0259263" TYPE="swap"
/dev/sda1: UUID="0d71ae1b-0b47-4a51-b158-c5911839c787" TYPE="swap"
/dev/sda2: UUID="b65f0041-e743-41f4-94a2-6496dfbcae97" TYPE="reiserfs"
/dev/sr0: LABEL="KNOPPIX" TYPE="iso9660"
root@Microknoppix:/home/knoppix# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 2104514 1052257 82 Linux swap / Solaris
/dev/sda2 * 2104515 234436544 116166015 83 Linux
knoppix fromhd=/dev/sda2 looks for usb??
If I put knoppix64 on a usb it works. Not so much a hard drive.
Go to /boot and copy vmlinuz-3.6.11-64 into vmlinuz and it will default to the 64 bit kernel on boot.
No, it looks for a Poor man's install - no matter whether this install is on an internal harddrive, external USB drive or USB stick. You only have to know the right partition name and number at boot time.looks for usb??Code:knoppix fromhd=/dev/sda2
Last edited by Werner P. Schulz; 05-01-2013 at 10:36 AM.
Thanks so much Werner. Works. So easy!
root@Microknoppix:/home/knoppix# uname -r
3.4.9-64
Intel Xeon 4210 Processor 10 Core 20 Thread | 3.20 GHz | 13.75 MB Cache SRFBL
$240.00
Intel Xeon E5-2699 V4 2.20Ghz 22 Core 55MB Cache 2011-3 CPU SR2JS Tested Grade A
$224.99
Intel Xeon E5-2697 V4 2.3Ghz 18 Core 45MB Cache 2011-3 CPU SR2JV Tested Grade A
$94.99
CM8064401739300 INTEL XEON PROCESSOR E5-2699V3 2.30GHZ 45M 18 CORES 145W
$61.00
Dell Precision 7820 x2 Xeon Silver 4110 32GB RAM 1TB SSD BTO Desktop*NO OS*
$349.00
Intel Xeon E5-2630 V3 - 2.40GHz Eight Core SR206 Processor
$4.50
Intel Xeon E3-1275 v2 3.5GHz 8MB 5GT/s SR0PA LGA 1155 B Grade CPU Processor
$30.00
Intel Xeon E5-2690v4 2.60GHz 14-Core 35Mb LGA2011-3 Processor SR2N2
$54.95
Dell Precision T3500 Xeon Workstation Computer Windows 10 Home 8GB 250GB 500GB
$170.99
HP Z800 Workstation Intel Xeon 2.90 GHz 16 GB 500 GB Windows 10 Pro
$219.99