I got the knoppix latest version. Booted with knoppix64 from DVD. uname shows
that it is using the 64 bit version. Cool. Installed to hard drive, but it installs 32 bit?
I installed it to an SSD drive which makes it very fast, but not all of the memory is
recognized.
Another thing is that version 7 doesn't allow the Browse for smb printers. Version 6
works perfectly and finds my XP host and printer. Everything is good with that.
Wireless detected perfectly in knoppix 7. How do I get rid of the exploding windows
when they close. I cannot find out how to change that. It should be an easy right?
Thanks - you guys are all great. Gals too.
Thank you so much. Could not find it!!
I tried to boot with a DVD and knoppix64 fromhd=/dev/sda. It is looking for a usb. sda is the hard drive. How would I
get it to see the hard drive. It also says my SSD is not partitioned. I thought I did that when installed it to the hard drive.
Hmmm. I think if I tried to use gpart I would lose all my data. No big deal, since I can start over if needed.
What happens if you tryWhat is the output fromCode:knoppix fromhd=/dev/sda1andCode:blkidCode:fdisk -l
Thanks Werner!
root@Microknoppix:/home/knoppix# blkid:
/dev/zram0: UUID="3e104d0a-d92e-44bb-b375-02cbb0259263" TYPE="swap"
/dev/sda1: UUID="0d71ae1b-0b47-4a51-b158-c5911839c787" TYPE="swap"
/dev/sda2: UUID="b65f0041-e743-41f4-94a2-6496dfbcae97" TYPE="reiserfs"
/dev/sr0: LABEL="KNOPPIX" TYPE="iso9660"
root@Microknoppix:/home/knoppix# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 1 2104514 1052257 82 Linux swap / Solaris
/dev/sda2 * 2104515 234436544 116166015 83 Linux
knoppix fromhd=/dev/sda2 looks for usb??
If I put knoppix64 on a usb it works. Not so much a hard drive.
Go to /boot and copy vmlinuz-3.6.11-64 into vmlinuz and it will default to the 64 bit kernel on boot.
No, it looks for a Poor man's install - no matter whether this install is on an internal harddrive, external USB drive or USB stick. You only have to know the right partition name and number at boot time.looks for usb??Code:knoppix fromhd=/dev/sda2
Last edited by Werner P. Schulz; 05-01-2013 at 10:36 AM.
Thanks so much Werner. Works. So easy!
root@Microknoppix:/home/knoppix# uname -r
3.4.9-64
IBM Power8 S822L Storage Server 8247-22L - With Ram, Some Cards, No HDD's
$399.95
IBM System X3650 M4 Server, 2 x Xeon E5-2630 2.3Ghz 32GB RAM, 2 x 1.2 TB HDD
$132.46
IBM SYSTEM X3500 M3 SERVER 7380AC1 2*XEON E5620 2.4GHz 8GB SEE NOTES
$33.21
IBM 8284-22A S822 Dual Power8 Cpu 512Gb (16x 32Gb) RAM
$795.00
IBM Lenovo X3650 M5 2U 8x 2.5” CTO Rack Server – 2x HS, 2x 750W
$199.00
IBM Power S822 12-Bay Server System Power8 Core 3.42Ghz DVD-Rom Drive 64GB No HD
$399.99
IBM x3650 M4 2x Xeon E5-2670 2.6ghz 16-Core / 64GB / M5110e / 2x PSU
$129.99
IBM Power S822 8284-22A 12SFF Power8 3.89GHz 6-Core 64GB RAM No Bezel/HDD Server
$359.99
IBM 8203 E4A p520 Server 8203-E4A 4.2GHz 2-Core POWER6 32GB RAM / NO HDD USED
$119.99
IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE
$199.87