Hi all..
I am new on Linux.
I prepared an usb flash includes diffrent Knoppix Distros.
I used Grub4Dos for boot Knoppıx 7.05 DVD.iso
My USB flash is like this.
====================
grldr
menu.lst
...
etc
ISO <Folder>
Knoppix.iso
Slax.iso
...
Etc
==================
I succesfully booted Knoppix. But after I booted Knoppix, I see that My USB Flash drive is not shown completely. Only content of Knoppix.iso is accessible.
When I check from Gparted , I shows me : /dev/sdb1 mounted /mnt-iso
I need to access whole usb stick.
How can I manage this ?
Thank you in advance...
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell Poweredge FC630 Blade Server BAREBONES No CPU, No HDD, No RAM
$75.00
Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores 256gb 2x 146gb 15k
$244.99
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99