Hi all..
I am new on Linux.
I prepared an usb flash includes diffrent Knoppix Distros.
I used Grub4Dos for boot Knoppıx 7.05 DVD.iso
My USB flash is like this.
====================
grldr
menu.lst
...
etc
ISO <Folder>
Knoppix.iso
Slax.iso
...
Etc
==================
I succesfully booted Knoppix. But after I booted Knoppix, I see that My USB Flash drive is not shown completely. Only content of Knoppix.iso is accessible.
When I check from Gparted , I shows me : /dev/sdb1 mounted /mnt-iso
I need to access whole usb stick.
How can I manage this ?
Thank you in advance...
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
Lot of 2 -Dell P2R3R PERC H330 Mini Mono 12Gbps SAS Non-raid Controller 0P2R3R
$39.99
XDHXT DELL PERC H710P 6Gbps 1GB PCI RAID CONTROLLER 0XDHXT
$59.00
HPE 727263-003 BL460c G9 Raid BBWC Smartstorage Battery
$24.99
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
Inspur LSI YZCA-00424-101 Raid Card 12Gbps HBA Controller Low Profile 9300-8i IT
$15.98
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Lenovo 930-16i PCIe SAS RAID Controller FRU P/N: 01KN508 Tested Working
$149.99
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99