Have a look at "Check the ISO" and also try the cheatcode "knoppix testcd"
I have a Dell Latitude Laptop that I have been running Zorin (Ubuntu derivitive) on. I just installed Knoppix from Flash drive and it went well and I was able to boot yesterday. I now booted up today and I get to where it says INIT: Entering runlevel: 5 and freezes. I am sitting at the root@Microknoppix:/#_ the underscore blinks for a few mins then stops and now I'm frozen.
Any help would be greatly appreciated.
Thanks
Have a look at "Check the ISO" and also try the cheatcode "knoppix testcd"
It;s installed on the hard drive. booted it two or three times then the next morning it wouldn't boot.
Ok, but what is about "check the ISO" and "knoppix testcd" with the Knoppix DVD/CD you've downloaded and used for HD installation? And what type of installation have you done: "HD Install" or "Flash Install to HD"?
Last edited by Werner P. Schulz; 05-09-2013 at 05:48 PM.
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Dell PowerEdge R730, 2 sinks, SystemBoard, 8 trays,H330,Idrac 8 exp, 2x750w Psu
$135.00
Dell Poweredge R730xd 2.5in 2x E5-2690 v3 2.6ghz 24-Cores 64gb H730 2x 750w
$189.99
CTO Dell PowerEdge R630 Server, 2x Xeon E5-2620V4, 64GB- 512GB RAM, 480GB SSDs
$246.67
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
DELL R730XD Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4x 1.2TB SAS 4xRJ45
$504.00