And I forgot. I have a problem with ntfs-3g.real
[ http://readlist.com/lists/lists.debi...ix/0/1705.html ]
Real work, but I'd like to mount worked bey limited. Thank you if anyone has any ideas.
-------
Link corrected by moderator
wps
Hello,
I modified the LiveCD and turned on in inittab password authentication and runlevel third After booting the CD in my tty2 a6 tty6 jumps these messages:
login timed out after 60 seconds knoppix
Do you know where it stops?
And I forgot. I have a problem with ntfs-3g.real
[ http://readlist.com/lists/lists.debi...ix/0/1705.html ]
Real work, but I'd like to mount worked bey limited. Thank you if anyone has any ideas.
-------
Link corrected by moderator
wps
Last edited by Werner P. Schulz; 05-15-2013 at 10:23 AM.
How do you think anybody can help you without knowledge of your modifications within your remastered CD? Probably you have one or more errors in your shell scripting.
Debug Shell Script
Last edited by Werner P. Schulz; 05-14-2013 at 09:13 PM.
1) I did the remastering Knoppix CD 7.05 (instructions here: http://ftp.knoppix.net/wiki/Knoppix_Remastering_Howto).
2) In the / etc / inittab I modified:
originalid
: 5: initdefault:
# 1:12345: respawn :/ bin / bash-login </ dev/tty1> / dev/tty1 2> & 1
New value
:id: 3: initdefault:
1:12345: respawn :/ bin / login </ dev/tty1> / dev/tty1 2> & 1
2:12345: respawn :/ bin / login </ dev/tty2> / dev/tty2 2> & 1
3:12345: respawn :/ bin / login </ dev/tty3> / dev/tty3 2> & 1
4:12345: respawn :/ bin / login </ dev/tty4> / dev/tty4 2> & 1
5:12345: respawn :/ bin / login </ dev/tty5> / dev/tty5 2> & 1
6:12345: respawn :/ bin / login </ dev/tty6> / dev/tty6 2> & 1
3) and complete instructions and finalize the CD.
So there was no modification scripts. And the error to ntfs-3g.real is a general problem, but I do not know how to force mount to use ntfs-3g.real and not just ntfs-3g (which does not connect NTFS Disk)
What happens if you try to login as user "root" + password from root or as user "knoppix" + password from knoppix? Be aware, neither root nor knoppix have any password by default.login timed out after 60 seconds knoppix
tty5 is reserved for X mode in runlevel 5Code:New value :id: 3: initdefault: ... 5:12345: respawn :/ bin / login </ dev/tty5> / dev/tty5 2> & 1 ...
Every minute is displayed: login timed out after 60 seconds knoppix
If you log in as root or Knoppix, so messages appear only in other terminals.
If you log out, then displayed again: login timed out after 60 seconds knoppix
The password for the root and knoppix I changed to the new password.
Problem with ntfs-3g I solved using apt-get upgrade (unfortunately, the capacity of CD increased to 100 MB).
After editing the inittab
# 5:12345: respawn :/ bin / login </ dev/tty5> / dev/tty5 2> & 1
The problem is still the same. Today I delete everything and start again, and step by step.
I would suggest that you use getty instead of login. It is also possible to adjust the LOGIN_TIMEOUT in the configuration file /etc/login.defs
Thank you!
That was the mistake. I modified login.defs
LOGIN_TIMEOUT 0
And it's switched off.
Note: If I modified as follows:
# LOGIN_TIMEOUT 0
and services launched at the default 60 seconds.
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$329.99
Dell Poweredge R440 2x Xeon Silver 4110 SR3GH 32GB RAM No Drives Server
$349.99
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU
$149.95
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$169.95
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Cisco UCS C220 M4 1x Xeon E5-2667 V4 3.20GHZ 128GB DDR4-2400MHZ 2x 770W AC PSU
$129.99
Dell Poweredge R730xd 12x 3.5 + 2x 2.5 / 2x E5-2680 v3 2.5ghz 32gb H730 2x 1100w
$349.99
Dell PowerEdge T620 Server 2x E5-2630 v2 2.60GHz 64GB RAM - NO HDDs
$242.99