And I forgot. I have a problem with ntfs-3g.real
[ http://readlist.com/lists/lists.debi...ix/0/1705.html ]
Real work, but I'd like to mount worked bey limited. Thank you if anyone has any ideas.
-------
Link corrected by moderator
wps
Hello,
I modified the LiveCD and turned on in inittab password authentication and runlevel third After booting the CD in my tty2 a6 tty6 jumps these messages:
login timed out after 60 seconds knoppix
Do you know where it stops?
And I forgot. I have a problem with ntfs-3g.real
[ http://readlist.com/lists/lists.debi...ix/0/1705.html ]
Real work, but I'd like to mount worked bey limited. Thank you if anyone has any ideas.
-------
Link corrected by moderator
wps
Last edited by Werner P. Schulz; 05-15-2013 at 10:23 AM.
How do you think anybody can help you without knowledge of your modifications within your remastered CD? Probably you have one or more errors in your shell scripting.
Debug Shell Script
Last edited by Werner P. Schulz; 05-14-2013 at 09:13 PM.
1) I did the remastering Knoppix CD 7.05 (instructions here: http://ftp.knoppix.net/wiki/Knoppix_Remastering_Howto).
2) In the / etc / inittab I modified:
originalid
: 5: initdefault:
# 1:12345: respawn :/ bin / bash-login </ dev/tty1> / dev/tty1 2> & 1
New value
:id: 3: initdefault:
1:12345: respawn :/ bin / login </ dev/tty1> / dev/tty1 2> & 1
2:12345: respawn :/ bin / login </ dev/tty2> / dev/tty2 2> & 1
3:12345: respawn :/ bin / login </ dev/tty3> / dev/tty3 2> & 1
4:12345: respawn :/ bin / login </ dev/tty4> / dev/tty4 2> & 1
5:12345: respawn :/ bin / login </ dev/tty5> / dev/tty5 2> & 1
6:12345: respawn :/ bin / login </ dev/tty6> / dev/tty6 2> & 1
3) and complete instructions and finalize the CD.
So there was no modification scripts. And the error to ntfs-3g.real is a general problem, but I do not know how to force mount to use ntfs-3g.real and not just ntfs-3g (which does not connect NTFS Disk)
What happens if you try to login as user "root" + password from root or as user "knoppix" + password from knoppix? Be aware, neither root nor knoppix have any password by default.login timed out after 60 seconds knoppix
tty5 is reserved for X mode in runlevel 5Code:New value :id: 3: initdefault: ... 5:12345: respawn :/ bin / login </ dev/tty5> / dev/tty5 2> & 1 ...
Every minute is displayed: login timed out after 60 seconds knoppix
If you log in as root or Knoppix, so messages appear only in other terminals.
If you log out, then displayed again: login timed out after 60 seconds knoppix
The password for the root and knoppix I changed to the new password.
Problem with ntfs-3g I solved using apt-get upgrade (unfortunately, the capacity of CD increased to 100 MB).
After editing the inittab
# 5:12345: respawn :/ bin / login </ dev/tty5> / dev/tty5 2> & 1
The problem is still the same. Today I delete everything and start again, and step by step.
I would suggest that you use getty instead of login. It is also possible to adjust the LOGIN_TIMEOUT in the configuration file /etc/login.defs
Thank you!
That was the mistake. I modified login.defs
LOGIN_TIMEOUT 0
And it's switched off.
Note: If I modified as follows:
# LOGIN_TIMEOUT 0
and services launched at the default 60 seconds.
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-FE-100LX 100BASE-LX SFP Transceiver Module
$15.59
Cisco GLC-FE-100LX-RGD 100BASE-LX SFP Transceiver Module
$17.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Mellanox Original MFM1T02A-SR 10GbE 10GBASE-SR SFP+ Transceiver
$9.00
New Cisco w/ Hologram SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28 Transceiver Module
$69.99
Arista DCS-7050SX-64-R 48P 10GbE SFP+ 4P 40GbE QSFP+ RA Switch
$169.00