And I forgot. I have a problem with ntfs-3g.real
[ http://readlist.com/lists/lists.debi...ix/0/1705.html ]
Real work, but I'd like to mount worked bey limited. Thank you if anyone has any ideas.
-------
Link corrected by moderator
wps
Hello,
I modified the LiveCD and turned on in inittab password authentication and runlevel third After booting the CD in my tty2 a6 tty6 jumps these messages:
login timed out after 60 seconds knoppix
Do you know where it stops?
And I forgot. I have a problem with ntfs-3g.real
[ http://readlist.com/lists/lists.debi...ix/0/1705.html ]
Real work, but I'd like to mount worked bey limited. Thank you if anyone has any ideas.
-------
Link corrected by moderator
wps
Last edited by Werner P. Schulz; 05-15-2013 at 10:23 AM.
How do you think anybody can help you without knowledge of your modifications within your remastered CD? Probably you have one or more errors in your shell scripting.
Debug Shell Script
Last edited by Werner P. Schulz; 05-14-2013 at 09:13 PM.
1) I did the remastering Knoppix CD 7.05 (instructions here: http://ftp.knoppix.net/wiki/Knoppix_Remastering_Howto).
2) In the / etc / inittab I modified:
originalid
: 5: initdefault:
# 1:12345: respawn :/ bin / bash-login </ dev/tty1> / dev/tty1 2> & 1
New value
:id: 3: initdefault:
1:12345: respawn :/ bin / login </ dev/tty1> / dev/tty1 2> & 1
2:12345: respawn :/ bin / login </ dev/tty2> / dev/tty2 2> & 1
3:12345: respawn :/ bin / login </ dev/tty3> / dev/tty3 2> & 1
4:12345: respawn :/ bin / login </ dev/tty4> / dev/tty4 2> & 1
5:12345: respawn :/ bin / login </ dev/tty5> / dev/tty5 2> & 1
6:12345: respawn :/ bin / login </ dev/tty6> / dev/tty6 2> & 1
3) and complete instructions and finalize the CD.
So there was no modification scripts. And the error to ntfs-3g.real is a general problem, but I do not know how to force mount to use ntfs-3g.real and not just ntfs-3g (which does not connect NTFS Disk)
What happens if you try to login as user "root" + password from root or as user "knoppix" + password from knoppix? Be aware, neither root nor knoppix have any password by default.login timed out after 60 seconds knoppix
tty5 is reserved for X mode in runlevel 5Code:New value :id: 3: initdefault: ... 5:12345: respawn :/ bin / login </ dev/tty5> / dev/tty5 2> & 1 ...
Every minute is displayed: login timed out after 60 seconds knoppix
If you log in as root or Knoppix, so messages appear only in other terminals.
If you log out, then displayed again: login timed out after 60 seconds knoppix
The password for the root and knoppix I changed to the new password.
Problem with ntfs-3g I solved using apt-get upgrade (unfortunately, the capacity of CD increased to 100 MB).
After editing the inittab
# 5:12345: respawn :/ bin / login </ dev/tty5> / dev/tty5 2> & 1
The problem is still the same. Today I delete everything and start again, and step by step.
I would suggest that you use getty instead of login. It is also possible to adjust the LOGIN_TIMEOUT in the configuration file /etc/login.defs
Thank you!
That was the mistake. I modified login.defs
LOGIN_TIMEOUT 0
And it's switched off.
Note: If I modified as follows:
# LOGIN_TIMEOUT 0
and services launched at the default 60 seconds.
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$22.45
Kingston 16GB 2Rx8 PC4-2400T-SB1-11 Laptop Memory K821PJ-MID Tested Working
$17.99
Hynix 2x 8GB (16GB) PC4-19200 DDR4-2400MHz 288Pin Desktop Memory Module
$18.99
32GB Kit 2 x 16GB PC4-3200AA-SE1-11 Laptop RAM DDR4 MICRON Memory
$41.99
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$54.99
Micron 16GB 2Rx8 PC4-2400T-SE1-11 Laptop Memory MTA16ATF2G64HZ-2G3E1 Tested
$17.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
A-Tech 128GB 4x 32GB 2Rx4 PC4-19200R DDR4 2400 ECC REG RDIMM Server Memory RAM
$191.96
256GB Kit (8 x 32GB) PC4-17000 LRDIMM DELL POWEREDGE R730xd R730 R630 Memory RAM
$255.92