Results 1 to 7 of 7

Thread: Video editing

  1. #1
    Senior Member
    Join Date
    Nov 2011
    Posts
    127

    Video editing

    I thought I'd start a thread about video editing, since this is the main reason that I sometimes use knoppix.

    I love the open shot 1.4.3 video editor with knoppix 7.0.5.

    I've been trying to edit some large .vob files and openshot seems to hang part way through. Interesting kino editor can play the file all the way, but can't seem to save to another file type.

    Today, I tried the WinFF converter and while it took a while, it was able to create a new file (choose wmv) when I enter past a few corrupted places. I can play the new wmv file all the way through with openshot.

    Have to watch that I have enough disk space on the video file drive USB.

    Openshot seems to be very fast and the basic features are easy to use.

    What tools are others using for video editing?

    I'm reall

  2. #2
    Junior Member
    Join Date
    Apr 2013
    Posts
    26

    Video editing

    Glad this editing is here. I also want to edit as I do in Windows using the Virtual Dub Package. I also tried to edit using OpenShot. I was disappointed. In windows with a very small install of VDub I can cut and save (very fast). I can correct interlace (sound and video) accurately. I started from scratch in knoppix 7.2 DVD on stick (Thumbdrive) Live - First, find the video 'Three Fingered Lightning' (Janko Rheinhardt) Jazz Guitarist story. It has a dead space 1 hr or so into a 1hr and 40 min film. VDub would allow me to cut the dead piece off the end and I would be finished (with a smaller video). OpenShot left me with a 600+MB file after the cut And it took an unusual amount of time for a simple 'cut, sync and save. Again, glad there is interest, but I see now that this area was started in 2013. Oh well, Thanks.
    Last edited by ttopp; 08-02-2014 at 08:30 PM.

  3. #3
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    It's hard to find a better tool than Virtual Dub, or one that can do nearly as many things. VD isn't always the easiest to use, but it is very capable when you can figure out the corrects steps to take to do your task.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  4. #4
    Junior Member
    Join Date
    Apr 2013
    Posts
    26
    Thank you. Yet, Unix in general, has been used; before Dos, windows, mac, etc. to edit video (cut and append) sync audio and video, or re make (at night) using different Codecs, a new updated video, ready by morning. What did they use? I want to use Calibre in 7.2 for my library, and it is not here. (off the track, sorry) - Using VDub vs Unix, Linix, Knoppix; you would think, someone, would have shared; a set of video tools, that are both useful and accurate - And, - have been around along time. Thanks. Ps. I tried to install VDub as a wine app but was not successful.

  5. #5
    Member
    Join Date
    Feb 2013
    Location
    Buenos Aires, Argentina
    Posts
    44
    Hi Dave.
    I've got a .avi movie, want to slice a thirty minutes .avi clip from it.
    VLC gives me the clip in .ts, and when trying to convert it to .avi gives me a file with sound but without image,
    How could the job be done?

    Thanks,
    Eduardo

  6. #6
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Eduardo,

    I don't intend to cut in front of Dave here and I still hope that he responds. I do expect that he has more video editing experience with Linux than I. But just to join the conversation:

    VLC is pretty impressive in what it can do, more than just video playback. Still, it wouldn't be my first choice of tools for this task. I hope that someone can give you VLC settings to avoid the TS file production, but I don't know how to do that.

    My first thought was that you didn't quite post enough information. Saying that a file is an AVI file really doesn't tell enough. AVI is a container that can hold video files encoded with a choice from a very large number of codecs. You really should state what codec the original file is encoded with. Also, is this the same codec that you want used for the 30 minute result? Once you cut to the TS file and then tried to go back to AVI you could have been re-encoding the new AVI with any codec, it doesn't seem likely to me that the re-encoding would have been with the original codec by chance.

    My personal choice of tools to do the video edit would be Virtual Dub (VD). It takes a few minutes to learn to use and isn't the most obvious tool, but it is amazingly powerful. It can cut the 30 minute segment out of your video without ever re-encoding it to another codec (for retaining all of the quality of the original). Or, if you need the new clip encoded differently (for a different device that doesn't support the original codec, or to reduce the file size with a more efficient codec, or even change the size of the output video to fit a small portable device), VD can do that.

    Full disclosure: my use of Virtual Dub has been exclusively under Windows. But a quick check showed me that it should be there on your Knoppix disc too. So I would definitely suggest that you look at understanding the Virtual Dub tool while you wait for a response from Dave. It is a little tricky to get started with, but the simple cut without re-encoding should be easy enough. Once you get past that you'll find that you can do things with it that you never even thought that you could do, although they may take a few minutes of setup and a lot of poking through the options.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  7. #7
    Member
    Join Date
    Feb 2013
    Location
    Buenos Aires, Argentina
    Posts
    44
    Thanks Harry!
    I finally sliced the movie with Ubuntu/Avidemux, which I couldn't find in K repository.
    Anyway, this is what I know about the original file, from Ubuntu/Properties:

    GENERAL
    Container: Audio Video Interleave (AVI)

    VIDEO
    Dimensions: 848 x 476
    Codec: ITU H.254
    Framerate: 30 frames per second

    AUDIO
    Codec: MPEG-1 Layer 3(MP3)
    Channels: Stereo
    Sample rate: 44100 Hz
    Birate: 128 kbps

    Will try to learn VD, just in case.
    Thanks again, Harry.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$20.00



NEW Sealed Cisco SFP-10G-SR-S 10G-SR 850nm 300m MMF LC SFP+ Transceiver *US Ship picture

NEW Sealed Cisco SFP-10G-SR-S 10G-SR 850nm 300m MMF LC SFP+ Transceiver *US Ship

$20.00



LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module picture

LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module

$74.99



New Sealed Cisco SFP-10G-LR 10GBASE-LR SFP Plug-in Transceiver Module picture

New Sealed Cisco SFP-10G-LR 10GBASE-LR SFP Plug-in Transceiver Module

$15.00



Cisco SFP-10G-SR 10-2415-03  10 Gigabit Transceiver  WARRANTY  LOT OF 10   @ F picture

Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver WARRANTY LOT OF 10 @ F

$38.79



🔥🔥🔥Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver 10-2415-03 🔥🔥🔥 picture

🔥🔥🔥Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver 10-2415-03 🔥🔥🔥

$8.00



Lot of 10 SFP-GB-GE-T Copper RJ45 10/100/1000Base-T 100m Transceiver Modules picture

Lot of 10 SFP-GB-GE-T Copper RJ45 10/100/1000Base-T 100m Transceiver Modules

$29.92



Lot of 10 - SFP-10G-SR OEM CISCO 10-2415-03 850nm 10GBASE-SR SFP+ picture

Lot of 10 - SFP-10G-SR OEM CISCO 10-2415-03 850nm 10GBASE-SR SFP+

$19.99



🔥🔥🔥Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver 10-2415-03 🔥🔥🔥 picture

🔥🔥🔥Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver 10-2415-03 🔥🔥🔥

$8.00



Mellanox ConnectX-2 Single Port SFP+ 10GB Ethernet Adapter - MNPA19-XTR picture

Mellanox ConnectX-2 Single Port SFP+ 10GB Ethernet Adapter - MNPA19-XTR

$19.99