Hi!
What kind of device do you want to use with WINE?
There is some information about USB support in the 'Official Wine Wiki' at http://wiki.winehq.org/USB but that page has been edited a long time ago ( 2011-11-10 09:58:19 ).
Re: Knoppix 7.0.3 LiveCD
Hi,
I was under the impression WINE supported USB, but it appears not to.
Q: Has anyone been able to hook WINE into the Universal Serial Bus?
thanks
luther
Hi!
What kind of device do you want to use with WINE?
There is some information about USB support in the 'Official Wine Wiki' at http://wiki.winehq.org/USB but that page has been edited a long time ago ( 2011-11-10 09:58:19 ).
Dear klaus2008:
SANE does not support the hp scanner I use w/XP. Therefore, I figured WINE was a valid alternative. Are there other valid options, using Knoppix, to handle this device?
link
Regards,
luther
On the page Scanners not supported by SANE you can read that Hewlett-Packard Scanjet 4890 is unsupported by sane, but at http://anonscm.debian.org/gitweb/?p=...commit&s=GL843 you can find out that there is some progress.
Knoppix 7.0.3 comes with an old libsane package (1.0.21-9). In the experimental branch of the Debian distribution you can find a more recent version of libsane (1.0.23). You could try to update SANE with the packages from the experimental branch and find out whether the scanner is supported by the newer libsane.
I would suggest that you boot off the Knoppix 7.0.3 CD and connect to the internet. Open an LXTerminal and issue the following commands.
Allow apt-get to overwrite the configuration file /etc/sane.d/dll.conf (enter 'Y' and press enter key).Code:sudo apt-get update sudo apt-get install libsane/experimental libsane-common/experimental libsane-extras/unstable sane-utils/experimental libsane-extras-common/unstable
Connect your scanner and issueSince the packages are from the experimental branch it is possible that the driver does not work properly. Therefore be prepared to unplug or switch off you scanner.Code:sane-find-scanner -v
Hi,
The chipset used is GL843. I found the following article regarding its logic:
link
Q: Any tips how this chipset can be added to the backend?
luther
Hey klaus2008!
Which INPUT is correct (Y/I/N/O/D/Z):
Configuration file `/etc/sane.d/dll.conf'
==> Modified (by you or by a script) since installation.
==> Package distributor has shipped an updated version.
What would you like to do about it ? Your options are:
Y or I : install the package maintainer's version
N or O : keep your currently-installed version
D : show the differences between the versions
Z : start a shell to examine the situation
The default action is to keep your current version.
*** dll.conf (Y/I/N/O/D/Z) [default=N] ?
*****************
luther
Altered cfg files:
luther
Installing new version of config file /etc/sane.d/dll.conf ...
Installing new version of config file /etc/sane.d/genesys.conf ...
Installing new version of config file /etc/sane.d/canon_dr.conf ...
Installing new version of config file /etc/sane.d/avision.conf ...
Installing new version of config file /etc/sane.d/gt68xx.conf ...
Installing new version of config file /etc/sane.d/xerox_mfp.conf ...
Installing new version of config file /etc/sane.d/lexmark.conf ...
Installing new version of config file /etc/sane.d/canon.conf ...
Installing new version of config file /etc/sane.d/fujitsu.conf ...
.udevdb or .udev presence implies active udev. Aborting MAKEDEV invocation.
Setting up libsane-extras-common (1.0.22.3) ...
Setting up libsane-extras:i386 (1.0.22.3) ...
Setting up sane-utils (1.0.23-0.1~experimental1) ...
Installing new version of config file /etc/sane.d/saned.conf ...
saned disabled; edit /etc/default/saned
Hi, luther!
In post #4 I suggested to overwrite the existing dll.conf with the new one because there were a few modifications.
Now that you have installed the new packages it is time to try the command 'sane-find-scanner -v'. HP Scanjet 4850 and 4890 share the same USB ID and HP Scanjet 4850 is included in the new /etc/sane.d/genesys.conf. Therefore I think you could try to use XSane from the menu .
Thanks klaus2008!
link
luther
I see that K 7.2 includes wine in version 1.5 (1.5.10-0knoppix1) - how to upgrade to wine 1.6?
The following commands (recommended to add ppa repository):
knoppix@Microknoppix:~$ sudo add-apt-repository ppa:ubuntu-wine/ppa
gives the following error (in a python script I think):
#######################################
Traceback (most recent call last):
File "/usr/bin/add-apt-repository", line 125, in <module>
ppa_info = get_ppa_info_from_lp(user, ppa_name)
File "/usr/lib/python2.7/dist-packages/softwareproperties/ppa.py", line 80, in get_ppa_info_from_lp
curl.perform()
pycurl.error: (77, 'Problem with the SSL CA cert (path? access rights?)')
#######################################
Anyone has a solution?
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$74.99
Western Digital WD60PURZ 6TB Hard Drive SATA6 Gb/s 64MB Cache 3.5 Inch
$109.99
Seagate Exos X20 16TB 7.2K 256MB 3.5" SATA 6Gb/s Enterprise HDD - ST16000NM000D
$139.99
WF12F DELL 1TB 7.2K 6GBPS SATA 2.5'' HDD HARD DRIVE ST91000640NS 0WF12F
$25.00
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.49
8TB Seagate Archive SATA 3.5" HDD Hard Drive 100% Healthy 200MB/s ST8000AS0002
$36.53
WD HDD Ultrastar DC HC520 HUH721212AL4205 12TB 3.5" SAS Server Hard Disk Drive
$45.30
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99