Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: Wifi Not working in Knoppix 7.0.5

  1. #11
    Junior Member
    Join Date
    Jun 2013
    Posts
    11
    So I reloaded the USB stick with a fresh install of Knoppix , reinstalled the new Wifi driver, and now Wifi IS working with no cheat code??
    I haven't tested if the Wifi still works with a reboot though.

    Whats happened now is the old comp I have been testing this on had a moment and wiped the USB stick.
    So I reloaded the stick again but now it won't boot? Reformatted a second time and reloaded but still no go?? Boot order is still set for USB 1st.

    Tried on another comp with boot order USB 1st and it didn't work on that either??

  2. #12
    Junior Member
    Join Date
    Jun 2013
    Posts
    11
    Ok, I have got this thing going again, but after reboot the Wifi stops working, so I need to get this cheat code working.

    So im back to this step,
    When I open "sudo leafpad /mnt-system/boot/syslinux/syslinux.cfg" there is nothing in there, its just an empty file??

  3. #13
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    How did you create your bootable USB stick?

    What happens if you issue
    Code:
    find /mnt-system -iname syslinux.cfg
    and
    Code:
    find /mnt-system -iname menu.lst

  4. #14
    Junior Member
    Join Date
    Jun 2013
    Posts
    11
    Those two commands didn't do anything.

    Im using unetbootin to create.

  5. #15
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    You will find a file called syslinux.cfg in the root directory of your bootable USB stick. If you use Windows open this file with wordpad. If you are running Knopix use Leafpad text editor.

    Search for a section with 'menu label knoppix' like the following:
    Code:
    label ubnentry2
    menu label knoppix
    kernel /boot/isolinux/linux
    append initrd=/boot/isolinux/minirt.gz ramdisk_size=100000 lang=de apm=power-off  nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime
    Move the cursor to end of the line starting with 'append' and add your cheat code there. In my case the new line looks like
    Code:
    append initrd=/boot/isolinux/minirt.gz ramdisk_size=100000 lang=de apm=power-off  nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime modprobe.blacklist=rtl8192cu
    Save the file and reboot.

  6. #16
    Junior Member
    Join Date
    Jun 2013
    Posts
    11
    Tried that but still no go?

    Code:
    label ubnentry2
    menu label knoppix
    kernel /boot/isolinux/linux
    append initrd=/boot/isolinux/minirt.gz ramdisk_size=100000 lang=en apm=power-off  nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime modprobe.blacklist=rtl8192cu

  7. #17
    Senior Member registered user
    Join Date
    Feb 2010
    Posts
    512
    I thought you would choose the menu entry 'knoppix' from the menu at boot time, but if you want to use 'Default' (the first entry in the boot menu) you have to edit the 'append' line of the 'Default' section. On my system I have got
    Code:
    label unetbootindefault
    menu label Default
    kernel /ubnkern
    append initrd=/ubninit ramdisk_size=100000 lang=de apm=power-off nomce  libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime modprobe.blacklist=rtl8192cu

  8. #18
    Junior Member
    Join Date
    Jun 2013
    Posts
    11
    Yes that's got it going now.

    I just use 'default' so I only have to hit enter to boot.

    Ahh now I see now how it works, so if I want to use Knoppix64 in the 'boot menu' at start up with Wifi, I would have to add it to that line as well.

    Thanks so much klaus2008 for your help to get this working.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HPE ProLiant BL460c Gen8 735151-B21 E5-v2 Blade Server LOADED w 512 GIGS MEMORY picture

HPE ProLiant BL460c Gen8 735151-B21 E5-v2 Blade Server LOADED w 512 GIGS MEMORY

$280.00



Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric picture

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric

$139.99



CISCO UCSB-B200-M3 UCS B200 M3 BLADE SERVER 2x Xeon E5-2650 2GHz 256GB RAM picture

CISCO UCSB-B200-M3 UCS B200 M3 BLADE SERVER 2x Xeon E5-2650 2GHz 256GB RAM

$169.00



Dell PEM420 M420 BLADE SERVER  | CHASSIS picture

Dell PEM420 M420 BLADE SERVER | CHASSIS

$250.00



DELL POWEREDGE M630 Blade 2x Xeon E5-2650 V3 2.3GHz 96GB NO HDD IDRAC8 picture

DELL POWEREDGE M630 Blade 2x Xeon E5-2650 V3 2.3GHz 96GB NO HDD IDRAC8

$75.00



Dell PowerEdge M630 / HHB Server Module w 2x Intel E5-2680 & Dell P3V42 No HDD picture

Dell PowerEdge M630 / HHB Server Module w 2x Intel E5-2680 & Dell P3V42 No HDD

$64.99



HP ProLiant 460 Series Gen8 Blade System 2x INTEL XEON E5-2670 / RAM (12x16GB) picture

HP ProLiant 460 Series Gen8 Blade System 2x INTEL XEON E5-2670 / RAM (12x16GB)

$89.99



Lot of 2 CISCO UCS B200 blade server  2x INTEL XEON X5675 3.06GHZ /RAM (12X 8GB) picture

Lot of 2 CISCO UCS B200 blade server 2x INTEL XEON X5675 3.06GHZ /RAM (12X 8GB)

$189.99



Oracle Sun Blade T6320 Blade Server Module 8-core 1.2GHz SPARC with 8GB Ram picture

Oracle Sun Blade T6320 Blade Server Module 8-core 1.2GHz SPARC with 8GB Ram

$99.00



Cisco B200 M4 Two E5-2660V3 64GB-16 Blade Server 2x SFF VIC1240 UCS-MR-1X162RU picture

Cisco B200 M4 Two E5-2660V3 64GB-16 Blade Server 2x SFF VIC1240 UCS-MR-1X162RU

$259.00