-
So I reloaded the USB stick with a fresh install of Knoppix , reinstalled the new Wifi driver, and now Wifi IS working with no cheat code??
I haven't tested if the Wifi still works with a reboot though.
Whats happened now is the old comp I have been testing this on had a moment and wiped the USB stick.
So I reloaded the stick again but now it won't boot? Reformatted a second time and reloaded but still no go?? Boot order is still set for USB 1st.
Tried on another comp with boot order USB 1st and it didn't work on that either??
-
Ok, I have got this thing going again, but after reboot the Wifi stops working, so I need to get this cheat code working.
So im back to this step,
When I open "sudo leafpad /mnt-system/boot/syslinux/syslinux.cfg" there is nothing in there, its just an empty file??
-
Senior Member
registered user
How did you create your bootable USB stick?
What happens if you issue
Code:
find /mnt-system -iname syslinux.cfg
and
Code:
find /mnt-system -iname menu.lst
-
Those two commands didn't do anything.
Im using unetbootin to create.
-
Senior Member
registered user
You will find a file called syslinux.cfg in the root directory of your bootable USB stick. If you use Windows open this file with wordpad. If you are running Knopix use Leafpad text editor.
Search for a section with 'menu label knoppix' like the following:
Code:
label ubnentry2
menu label knoppix
kernel /boot/isolinux/linux
append initrd=/boot/isolinux/minirt.gz ramdisk_size=100000 lang=de apm=power-off nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime
Move the cursor to end of the line starting with 'append' and add your cheat code there. In my case the new line looks like
Code:
append initrd=/boot/isolinux/minirt.gz ramdisk_size=100000 lang=de apm=power-off nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime modprobe.blacklist=rtl8192cu
Save the file and reboot.
-
Tried that but still no go?
Code:
label ubnentry2
menu label knoppix
kernel /boot/isolinux/linux
append initrd=/boot/isolinux/minirt.gz ramdisk_size=100000 lang=en apm=power-off nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime modprobe.blacklist=rtl8192cu
-
Senior Member
registered user
I thought you would choose the menu entry 'knoppix' from the menu at boot time, but if you want to use 'Default' (the first entry in the boot menu) you have to edit the 'append' line of the 'Default' section. On my system I have got
Code:
label unetbootindefault
menu label Default
kernel /ubnkern
append initrd=/ubninit ramdisk_size=100000 lang=de apm=power-off nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime modprobe.blacklist=rtl8192cu
-
Yes that's got it going now.
I just use 'default' so I only have to hit enter to boot.
Ahh now I see now how it works, so if I want to use Knoppix64 in the 'boot menu' at start up with Wifi, I would have to add it to that line as well.
Thanks so much klaus2008 for your help to get this working.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell X1018 X-Series Smart Managed Switches 16-Port Gigabit 2-Port SFP Switch
$45.00
Fortinet FortiSwitch FS-248D-FPOE 48-Port Gigabit PoE Ethernet Network Switch
$99.99
Loocam Gigabit PoE Switch 8 Port 96W 2 Uplink Port Unmanaged Ethernet Switch
$49.99
Linksys LGS318p 18-Port Business Smart Gigabit PoE+ Managed Network Switch
$59.99
TP-Link TL-SG108 8-Port Gigabit Ethernet Switch
$14.99
Tenda 8-Port Gigabit Desktop Switch SG108 NEW
$15.00
TP-Link TL-SG108PE 8-Port Gigabit Easy Smart Switch with 4-Port PoE
$47.80
Netgear ProSafe JGS524PE Plus 24-Port Gigabit POE Ethernet Network Switch W Ears
$54.89
Fortinet FortiSwitch FS-124D-POE 24 Port Gigabit Ethernet Switch UNREGISTERED
$99.97
Cisco WS-C3850-12X48U-S
$159.99