-
Senior Member
registered user
Knoppix 7.2 breaks PXE boot
I have successfully PXE booted Knoppix 7.0.5 using pxelinux with the following relevant settings:
Code:
kernel knoppix/linux
append nfsdir=192.168.1.200:/knoppix nodhcp lang=en apm=power-off ramdisk_size=100000 init=/etc/init nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime BOOT_IMAGE=KNOPPIX
initrd knoppix/miniroot.gz
After upgrading the copy of Knoppix on my NFS server to 7.2 and upgrading the files "linux" and miniroot.gz (now called minirt.gz) to the new versions, PXE boot now errors out. My pxelinux config is the same except that I have upgraded the last line to reflect the new file minirt.gz.
I get the following error message:
Code:
/init: cd: line 1: can't cd to /modules/net
Loading network device module(s)
/init: cd: line 1: can't cd to /modules/net
sh: can't access tty; job control turned off
/ #
-
Senior Member
registered user
Resolved
Sorry for the post, I fixed my own issue. After looking into this more, miniroot.gz did not change to minirt.gz. I was trying to grab the files off of the CD .iso but I forgot that it is a real pain in the butt to get a hold of both "linux" and minirt.gz since you can't get them this way. Instead you have to boot up a copy of the knoppix distro, start knoppix terminal server so that the /tftpboot dir is created, and then copy off these files from this dir. What a pain.
-
Using the DVD, terminal services do not appear to work properly. Remote station will start the boot process but fail at Probing network device handles by .ko sh cant access tty job control turned off. For example, yellowfin.sh, I can reconfigure to include yellowfin and the error just returns to the next ko thats not selected. just keeps going up the list.
Anyone ran into that?
Thanks, Tim
-
Any luck on this itman007? I've noticed several of my lab machines are not booting my knoppix PXE because they fail to load the network drivers (error displays something about the last file in modules, yellofin or zaurus.ko). I've selected all drivers when setting up knoppix terminal (select-all love on that screen please) and on another test added more drivers into modules/firmware with no luck.
-
No luck yet. Im going to need to dedicate some time to figure this out unless Werner or someone steps up. What are your lab pcs? Mine are Dell Optiplex 740s mostly.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$11.99
Team T-FORCE VULCAN Z 16GB (2 x 8GB) DDR4 3200 PC Ram Intel XMP 2.0 Memory
$27.99
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$23.98
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$11.99
A-Tech 16GB DDR4 2400 MHz PC4-19200 Laptop SODIMM 260-Pin 2Rx8 Memory RAM 1x 16G
$24.99
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$46.95
Samsung 16GB 2Rx4 PC3L-12800R DDR3-1600 1.35V ECC REG RDIMM Server Memory RAM 1x
$8.50
A-Tech 16GB 2x 8GB PC3-10600 Desktop DDR3 1333 MHz DIMM 240pin Memory RAM 16G 8G
$23.98
A lot 8 of 16GB HYNIX DDR4 2133 2Rx4 PC4-2133P HMA42GR7AFR4N-TF RAM MEMORY RDIMM
$99.99
A-Tech 128GB 4x 32GB 2Rx4 PC4-21300R DDR4 2666 ECC REG RDIMM Server Memory RAM
$131.96