-
Senior Member
registered user
Knoppix 7.2 breaks PXE boot
I have successfully PXE booted Knoppix 7.0.5 using pxelinux with the following relevant settings:
Code:
kernel knoppix/linux
append nfsdir=192.168.1.200:/knoppix nodhcp lang=en apm=power-off ramdisk_size=100000 init=/etc/init nomce libata.force=noncq hpsa.hpsa_allow_any=1 loglevel=1 tz=localtime BOOT_IMAGE=KNOPPIX
initrd knoppix/miniroot.gz
After upgrading the copy of Knoppix on my NFS server to 7.2 and upgrading the files "linux" and miniroot.gz (now called minirt.gz) to the new versions, PXE boot now errors out. My pxelinux config is the same except that I have upgraded the last line to reflect the new file minirt.gz.
I get the following error message:
Code:
/init: cd: line 1: can't cd to /modules/net
Loading network device module(s)
/init: cd: line 1: can't cd to /modules/net
sh: can't access tty; job control turned off
/ #
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$49.95

Seagate Exos X18 18TB 7200RPM 256MB SATA6Gb/s 3.5" Enterprise HDD -ST18000NM014J
$198.50

Western Digital Ultrastar DC HC530 14TB Internal Hard Drive MINT 10 Available
$109.00

Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$109.95

WL 4TB 64MB Cache 7200RPM (Enterprise Grade) SATA 6Gb/s 3.5" Internal Hard Drive
$38.88

Seagate ST8000NC0002 8TB 7200RPM 256MB 6Gb/s 3.5" Hard Drive (NAS, CCTV, PC/MAC)
$79.99

Hard Drive, SATA , 3.5", 500GB HDD, Mixed Brands (pallet)
$5.99

Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.88

1TB HDD/SSD 2.5" SATA Hard Drive for Laptop with Win 10/Win 11 Pro Pre-installed
$43.65

Seagate EXOS X16 ST16000NM001G 16TB 256MB 7200rpm 3.5" SATA 6Gb/s Enterprise HDD
$163.50