Hi,
Just a few notes here about the installation of Knoppix 7.2.0 on an old EEEPC 701 (512 Mo RAM, 4 Go SSD, 800x480 screen).
Works OK, wifi OK. But installation to hard disk (SSD in fact) was painful because of the restrictions and lack of configurability of KNOPPIX "0wn" script. For successful use of the "0wn" script I did the following:
* Modify /usr/share/0wn/0wn-partitioning so that fonction get_disks() only returns "/dev/sda" (the result normally includes /dev/sdc, which causes a bug on my machine because /dev/sdc is not available)
* Reduce swap size in function partition_whole_disk() in script /usr/share/0wn/0wn-partitioning
* Reduce SWAP_NEEDED value accordingly in script /usr/share/0wn/0wn-common
After this, the "0wn" script could run flawlessly and installation finished correctly. Last configuration was to set "xmodule=fbdev" in the boot command line, in order to get the 800x480 screen resolution working.
O.
Dell PowerEdge FX2S 4 Slot Blade Chassis - CMC, 2x 2400W PSU
$299.00
Dell PowerEdge MX740C Blade Server CTO Chassis H730P
$349.00
Nutanix NXS2U2NL12G500 2U Server with 2x X10DRT-P-G5-NI22 Blades USED
$349.99
Dell PowerEdge M620 Blade Server 2 x Xeon e5 2665 8 x 16 GB(128) RAM - No HD
$44.99
Dell PowerEdge M620 CTO Blade Server (for M1000e or VRTX) 32GB(4x8GB RAM) No HDD
$72.16
Dell PowerEdge M520 CTO Blade Server 2xIntel Xeon E5-2430, No RAM No HDD
$40.00
HP ProLiant BL460c Gen9 Blade Server x2 Intel Xeon E5-2698 v3 - 512GB RAM
$250.69
Dell Poweredge FC630 Blade Server CTO Chassis 2x Xeon E5-2699 v4 2.2GHz, H730
$378.00
Dell PowerEdge FC830 8-SFF 4*Xeon E5-4669v3 2.1GHz No HDD/RAM Blade Server Node
$179.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00