Hi,
Just a few notes here about the installation of Knoppix 7.2.0 on an old EEEPC 701 (512 Mo RAM, 4 Go SSD, 800x480 screen).
Works OK, wifi OK. But installation to hard disk (SSD in fact) was painful because of the restrictions and lack of configurability of KNOPPIX "0wn" script. For successful use of the "0wn" script I did the following:
* Modify /usr/share/0wn/0wn-partitioning so that fonction get_disks() only returns "/dev/sda" (the result normally includes /dev/sdc, which causes a bug on my machine because /dev/sdc is not available)
* Reduce swap size in function partition_whole_disk() in script /usr/share/0wn/0wn-partitioning
* Reduce SWAP_NEEDED value accordingly in script /usr/share/0wn/0wn-common
After this, the "0wn" script could run flawlessly and installation finished correctly. Last configuration was to set "xmodule=fbdev" in the boot command line, in order to get the 800x480 screen resolution working.
O.
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$75.00
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2294.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
DELL POWEREDGE M620 Blade 2x Xeon E5-2670 2.5GHz 128GB 2x300GB HDD
$94.50
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c G8(Gen8) 2x 8 CORE E5-2670 2.6GHz 192GB RAM 2x 146GB SAS HDD
$78.00
Dell PowerEdge M1000e (BMX01) Server Enclosure w/ 16-PowerEdge M610 Blade Server
$899.99
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$349.00
Dell PowerEdge M620 Blade Server
$39.99